Recalls

Recall 2010274

  • CA Recall: Steering
    On certain vehicles with electro-hydraulic power assist steering (ehpas), rust had formed inside the high-pressure pipe on the power steering system during manufacturing due to improper processing. rust particles may detach from the pipe walls and enter the motorized power steering pump, causing damage to the pump bearings. as a result, gear lubrication may be reduced, leading to an increased load on the motor. should this happen, there is the potential for the power steering system to enter the fail safe mode in order to prevent overheating, resulting in the power steering warning lamp to light and the motorized pump to stop which could lead to a loss of power assist and the required steering effort will increase. correction: dealers will flush the power steering system and repair as necessary.

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.