Recalls

Recall 2013064

  • CA Recall: Other
    Certain vehicles fail to conform to canada motor vehicle safety standard 102 – transmission control functions. specifically, the ignition interlock system was designed to allow the engine to start with the gear selector in any position, and to only engage the chosen gear once the service brake is applied and the gear selector is shifted into neutral position then moved from neutral into a forward or reverse drive position. this does not meet the requirements of the standard which stipulates that the engine cannot be started if the transmission control is in a forward or reverse drive position. correction: dealers will install a neutral start harness that will prevent the engine from starting unless the transmission selector is in the neutral position.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.