Recalls

Recall 2015507

  • CA Recall: Lights and instruments
    Certain brush chipper and stump cutter units may not comply with the requirements of canada motor vehicle safety standard 108 - lighting system and retro reflective devices. during manufacturing, the side marker led lights installed did not include a reflex reflector built into the lens and no other reflex reflectors were installed on the sides of the trailers, which fails to meet the requirements of the standard. this could reduce vehicle conspicuity, which could increase the risk of a crash causing injury and/or damage to property. correction: dealers will install separate reflectors with sae (a) marking or led side marker lights with reflex reflectors with an sae (a) rated lens.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.