Recalls

Recall 2015561

  • CA Recall: Steering
    On certain vehicles manufactured with a 2-piece steering shaft, the bolt torque on the joint that couples the upper and lower steering shaft could be lower than specification. this could cause the bolt to loosen, which may result in separation of the two shafts. separation of the two shafts would result in complete loss of steering, increasing the risk of a crash causing injury and/or damage to property. correction: instructions will be sent to owners advising them to tighten the bolt as an interim measure. dealers will inspect the steering shaft, and affect repairs as necessary. note: this recall is superseded by recall 2016-077. please see recall 2016-077 for more information. click here for more information

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.