Recalls

Recall 209029

  • USA Recall: Overloaded bolts can fail, causing the pedestal to separate and increasing the risk of injury or death.
    Altec industries, inc. (altec) is recalling certain 2020-2021 at200a, at235, at235p aerial devices. bolts of insufficient strength may have been used to connect the pedestal and sub-base, which could cause the bolts to become overloaded.

    Corrective Action:
    Altec will issue remedy instructions to owners, to inspect the bolts, and replace any grade 5 bolts with grade 8 bolts, free of charge. owner notification letters were mailed on july 22, 2021. owners may contact altec customer service at 1-800-462-5832. altec's number for this recall is csn 825.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.nhtsa.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.