Recalls

Recall R/2017/114

  • UK Recall: Plug in contact cable may malfunction
    >It is possible that the connection between the b+ cable and the power distribution box can become damaged by wear and heat which is caused by high current flow and high contact resistance. normally this will result in a non-start situation after parking the vehicle. however it is possible that this could in extreme cases occur whilst the vehicle is in motion. the driver should be made aware of the issue by flickering of the instrument cluster (dash) or an engine mis-fire; but if the driver does not then the engine could cut-out without warning.

    Corrective Action:
    Recall all affected vehicles with petrol engines and replace the cable/connection with a more robust item.

    36410 Affected Units 🚙🚙🚙🚙🚙🚙🚙
    From VIN WBAUM12040VL29423 to WBAUM12090VP59495

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.