Recalls

Recall R/2018/148

  • UK Recall: Variation to electrical resistance in the blower regulator wiring harness connector
    >Over time irregularities in the crimp connection in conjunction with relative movements of the tin coated connector at the end of the wiring harness which connects to the tin coated blower regulator pin could lead to frictional corrosion. in combination with very high current flow which would occur which could lead to a temperature increase. as a result the blower regulator wiring could be damaged and could lead to partial contact of individual wire strands. this could result in an irregular current flow further overheating and increase the risk of fire.

    Corrective Action:
    The blower regulator wiring harness will be inspected and a new part will be installed.

    279104 Affected Units 🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙🚙
    From VIN WBAVC32090KS00002 to WBAPP12010F026663

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.