Acura Integra 1991

• Recall 85513 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 38028 [USA]: Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
  Certain tradesonic combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  tradesonic will notify owners and replace the lamps free of charge. The recall is expected to begin during july 2006. Owners may contact tradesonic at 626-934-8884.
  this recall only pertains to tradesonic aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 50782 [USA]: Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash
  Certain aai motorsports combination lamps sold as replacement lamps for use on the above list passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
  aai motorsports will notify owners and replace the lamps free of charge. The recall began on august 1, 2006. Owners may contact aai motorsports at 909-923-9188.
  this recall only pertains to aai motorsports aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 51076 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 61783 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash.
  Certain anzo combination headlamp assemblies sold as replacement lamps for use on certain passenger vehicles. Some combination lamps are not equipped with amber side reflectors which fail to conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
  anzo will notify owners and replace the headlamps free of charge. The recall began may 9, 2006. Owners may contact anzo usa at 909-468-3688.
  this recall only pertains to aftermarket headlamp assemblies manufactured by anzo and has no relation to any original equipment installed on the listed passenger vehicles.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 18079 [USA]: The safety belts would not provide adequate protection to an occupant in a vehicle crash.
  The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
  owners should promptly check the condition and operation of both front safety belt buckles. Carefully inspect the red release button for any breaks or cracks. Check that both buckles are operating properly by inserting each latch plate into its buckle, tug on the belt to make sure the latch is securely locked, then press the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows any sign of breakage or cracking, or if either buckle fails to operate properly, promptly contact your authorized honda/acura dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent the failure of the buttons that are not currently broken.
  system: interior; seat belts; belt buckles.Vehicle description: 2-door, 4-door and 5-door passenger vehicles equipped with safety belts made by takata corporation.Note: if your vehicle is presented to an authorized dealer at an agreed upon service date and the remedy is not provided free of charge within a reasonabletime, please contact honda/acura at 1-800-999-1009. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 25654 [USA]: Hitch tow bar could separate from the vertical mountingplate, resulting in tow bar attachment failure and separation of trailer fromtow vehicle without warning.
  
  a component will be supplied to customer to be attached to the vehicle towing loop, to eliminate cyclic stress in the vertical load plate. Units found with existing fatigue fractures will be replaced with modified hitches.
  system: trailer hitch installed on 1990 and 1991 acura integra.Defect description: fatigue failure of the trailer hitch vertical mounting platecaused by cyclic stress from extended use under overloaded conditions, in thezone adjacent to a weld.Note: this recall is being conducted by carrol smith consulting, inc.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Seat belt buckle failure investigation # EA94035

  There is no summary currently available
  

  Show Content

• Speed control failure investigation # PE91069

  There is no summary currently available
  

  Show Content

When i open the driver's side door, the driver's seat belt retracts forward which is correct. But when i close the door, the driver's seat belt should retract back to me but it doesn't. The seat belt is stuck in the forward position, the red seat belt light is on and there is a constant beeping sounding.

The electric seatbelt on the drivers side no longer retracts. Its stuck in the downward position. Took it to the acura dealership in peoria, az and i was told its not their problem to fix.. Yet i have read all over the internet that acura will fix for the life of the car. This is a major issue! If i get seriously injured or die is acura going to pay for my medical bills or my funeral since they were negligent in making sure something as a safety issue really works!!!! The seatbelt they made electric should be covered under full warranty since they made unsafe seatbelts that save lives!!!!!!! I believe this needs to be fixed asap. According to this site and google this is a major issue acura is ignoring since they created the seatbelt yet don't want to fix it! How is it the owner of the cars responsibility if they make a safety feature that doesn't even last the length of the vehicle! I will never buy acura or encourage anyone to buy from a maker who doesn't care about human safety!!!! Disgusting!!! *tr

The driver's side seat belt retractor failed to operate beginning at 6:30 am tuesday, 3/22/2011, after putting my car key into the ignition and turning the car on (mileage = 239,146) to go to work. The retractor did not move at all and no sound was ever made indicating failure or trouble. This seat belt retractor has always worked during the entire time that i have owned the vehicle (note: i am not the original owner). The retractor simply failed in the unrestrained position (aka forward position) and has not moved since then. The red seat belt light is always on now, and if i happen to start the car with the driver's side door open (whether the seat belt is connected to the retractor or not), a beeping sound can be heard during the entire time that i am operating the vehicle. Otherwise, there is no beeping. (in the months leading up to the failure of the retractor, i noticed that when i would get into the driver's seat and close the driver side door and turn the car on, the retractor worked just fine but the red seat belt light would not turn off. I would then have to open my door and close it again and the light would always go away after that - strange isn't it?). On friday, 3/25/2011, i took this vehicle to sierra acura, a dealership located at 1700 w. Main st., alhambra, ca 91801, (mileage = 239,201) to determine why it failed, and to see if there were any warranties, recalls, etc. The sierra acura technician determined that the retractor's motor experienced an internal failure (not a mechanical failure) and recommended replacement of the seat belt motor assembly ($446) and the seat belt rail ($391). The dealership charged me $92.00 for this inspection service. According to a service advisor and service manager, the motor assembly and rail were not covered under any warranty, recall, etc. Only the belt itself and the red clips were covered.

Clear coat paint is peeling-off. *ak

Ignition switch keeps burning out and has to be replaced. Please add further information.*ak

Passenger automatic seat belt randomly over-retracts as passenger door is closed and seat is occupied. Belt only loosens if door is re-opened. *nlm

Driver's seat belt is stuck in forward position and will not retract. Dealer had tried to repair seat belt, but failed to do so. Please provide more information.*ak

Consumer had filled gas tank, and next day car started to hesitate like there was no gas, and then cut off. Currently, it won't start. Took to a mechanic, and he said it was current that going into distributor, but not coming out. *ak

Automatic driver's side seat belt retractor is not working, it won't retract when starting the car. Consumer is not properly restrained on driver's side.