Altec Digger Derrick 2022
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2022 ALTEC Digger Derrick.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| ALTEC |
Use the box here to look up VINs from ALTEC as well as other manufacturers
-
Are there recalls for the 2022 ALTEC Digger Derrick?
- There are 8 recall(s) for the 2022 ALTEC Digger Derrick, additional information is below.
Recall 249797 [USA]: An uncontrolled load falling increases the risk of injury to personnel or others nearby.
Recall 249749 [USA]: Without a circuit breaker, the ac circuit may overheat, increasing the risk of a fire.
Recall 240356 [USA]: An electrical short-circuit can increase the risk of a fire.
Recall 245523 [USA]: Lifting loads above the boom capacity could overload the unit and cause instability, increasing the risk of injury.
Recall 234804 [USA]: An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.
Recall 234446 [USA]: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Recall 204281 [USA]: An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.
Recall 200241 [USA]: A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SIL 3119 - UNKNOWN OR OTHER: Altec has learned that an incorrect grade auger retention pin could be installed on certain dc, dl, and dm derricks built from july 2015 to august 2023. Over time, this could result in the pin becoming damaged.
- SIL 3099 - EQUIPMENT: Altec has learned that on certain altec units equipped with air suspension built from april 2020 to june 2023, some operators may be dumping the chassis airbags before deploying the outriggers. This can cause the airbags to become damaged.
- SIL 3077 - ELECTRICAL SYSTEM: Altec has learned that the samlex inverter default threshold on certain units built from august 2022 to april 2023 may not be able to accommodate the 110 power accessories at the platform. This can result in the operator being unable to use
- SIL 3080 - EQUIPMENT: Altec has learned that certain ah, ls, at-p, an, dc, dh-e/h, and at-m series aerial devices built from march 2022 to march 2023 have a non-skid coating on the deck that could delaminate and flake off over time. This causes the deck surface
- SIL 3054 - EQUIPMENT: Altec has learned that certain units built with a jobsite energy management system (jems) s/se/le from october 2020 to may 17, 2023, may fail to charge or operate properly, particularly when the battery is cold. Altec has developed a firmwa
- SIL 3068 - EQUIPMENT: Altec has learned that certain digger derricks and aerial devices of various models built from january 2010 to january 2023 may contain access steps with a handrail and side plate that come together in a small space causing a potential pinc
- CSR-3092 - VISIBILITY: Altec industries, inc. Has received notification from daimler truck north america llc (dtna), on behalf of its freightliner truck division, that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you
- CSR 3075 - PARKING BRAKE: Altec industries, inc. Has received notification from navistar, inc. That a condition exists relating to motor vehicle safety, compliance, or emissions in certain 2022 through 2024 model year navistar hv and mv series vehicles built from ja
- CSR 3073 - BRAKES (PWS): Altec industries, inc. Has received notification from kenworth truck company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle that is equipped with altec equipment. Kenworth truck company has d
- SIL 3041 - UNKNOWN OR OTHER: Altec has learned that when the coolant-style oil heater on certain ah75b/85B100B aerial devices built from april 2021 to august 2022 is active, the operator has to turn off the engine in order to disengage the power take-off (pto). Replace
- CSR 3051 - ELECTRICAL SYSTEM: Altec industries, inc. Has received notification from peterbilt that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with altec equipment. Peterbilt has decided that ce
- CSR 3050 - SUSPENSION: Altec industries, inc. Has received notification from navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with altec equipment. Navistar has decided that cert
- CSR 3034 - ENGINE AND ENGINE COOLING: Altec industries, inc. Has received notification from cummins inc. That a condition exists relating to motor vehicle safety, compliance, or emissions in certain vehicles with cummins b6.7, l9, x12, and x15 engines that were manufactured bet
- CSR-3028 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Altec industries, inc. Has received notification from navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with altec equipment. Navistar has decided that a de
- CSR-3023 - STEERING: Altec industries, inc. Has received notification from daimler trucks north america llc (dtna) that a condition exists relating to motor vehicle safety in a vehicle that is equipped with altec equipment. For certain 2023 freightliner 108sd,
- CSR 529 - EQUIPMENT: Altec industries, inc. Has received notification from an original equipment manufacturer (oem) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an altec aerial device o