Bmw 430i Convertible 2019

• Recall 128705 [USA]: An improperly folded and assembled air bag may not deploy as intended, increasing risk of injury.
  Bmw of north america, llc (bmw) is recalling certain 2019-2020 230i, 230i xdrive, m240i, m240i xdrive, m2 competition coupe, 430i, 430i xdrive, 440i, 440i xdrive, m4, and 2019 330i xdrive sportswagon vehicles. The driver and passenger knee air bag assemblies may have been improperly folded and assembled.
  bmw will notify owners, and dealers will replace the knee air bag modules, free of charge. The recall began july 8, 2019. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 133944 [USA]: If the front passenger air bag does not deploy properly in the event of a crash, the occupant has an increased risk of injury.
  Bmw of north america, llc (bmw) is recalling one each of 2019 bmw 430i xdrive gran coupe, 440i xdrive gran coupe and 430i xdrive convertible vehicles. The front passenger air bag inflator may have been incorrectly manufactured, potentially affecting the air bag deployment performance in the event of a crash.
  all affected vehicles are still in dealer inventory. Dealers will replace the front passenger air bag module, free of charge.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 138918 [USA]: A vehicle stall can increase the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain 2018 bmw 540d xdrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On september 12, 2018, bmw expanded the recall to a total of 5,309 vehicles including certain 2018-2019 bmw 540d xdrive, 230i m240i, m240i xdrive, x2 sdrive28i, x2 xdrive28i, x1 sdrive28i, x1 xdrive28i, 330i, 330i xdrive, 340i, 340i xdrive, 330i xdrive gran turismo, 530i, 530i xdrive, 540i, 540i xdrive, 530e, 530e xdrive, 640i xdrive gran turismo, 330e, 2019 430i gran coupe, 430i xdrive gran coupe, 440i gran coupe, 440i xdrive gran coupe, 430i, 430i xdrive, 440i, 440i xdrive, 740i, 740i xdrive, mini cooper, cooper s, jcw, mini countryman (cooper, cooper all4, cooper s, cooper s all4, jcw all4), and mini clubman (cooper, cooper s, cooper all4, cooper s all4, jcw all4) vehicles.
  bmw will notify owners, and dealers will replace the crankshaft sensor, free of charge. The recall began september 6, 2018. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

My sunroof exploded on me while driving. Luckily there was no other traffic on the roadway. The explosion was violent and sounded like a gunshot.

My sunroof exploded on me while driving. Luckily there was no other traffic on the roadway. The explosion was violent and sounded like a gunshot.

Seat occupancy sensor is sensing a fault. It says it is not working and the airbag is not on. The dealer is reluctant to repair it, because it's expensive. It's ucleat if the airbag will work.

Takata recall