Bmw K1200 R Sport 2007

• Recall 142581 [USA]: A fuel leak in the presence of an ignition source can increase the risk of a fire.
  Bmw of north america, llc (bmw) is recalling certain 2009-2011 k1300 (s, gt), 2010-2011 s1000 rr, 2005-2011 r1200 (gs, gs adventure, r, rt, s, st), 2006-2010 hp2 (enduro, megamoto, sport), 2005-2008 k1200 (r, r sport, s, gt), and 2012 k1600 (gt, gtl) motorcycles that were repaired under recall 13v-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.
  bmw will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began january 18, 2021. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114905 [USA]: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain model year 2005-2010 r1200gs and r1200rt, 2006-2010 r1200gs adventure, 2007-2010 r1200r, 2007 r1200s and k1200r sport, 2005-2007 r1200st, 2008-2009 hp2 megamoto, 2006 hp2 enduro, 2008-2010 hp2 sport, 2005-2008 k1200s, 2006-2008 k1200r, k1200gt, 2009-2011 k1300s, 2010-2011 k1300r, and 2009-2010 k1300gt motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
  bmw will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on may 7, 2015. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 101427 [USA]: A fuel leak in the presence of an ignition source may result in a fire.
  Bmw of north america, llc (bmw) is recalling certain model year 2005-2011 model year r-model motorcycles, model year 2005-2012 k-model motorcycles, model year 2010-2011 s 1000 model motorcycles, and model year 2006-2010 hp2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
  bmw will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on april 16, 2014. Owners may contact bmw customer relations at 1-800-525-7417 or email bmw at [email protected].
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 93064 [USA]: Brake fluid that foams could lead to a reduced braking capability of the front brake system, possibly resulting in a crash.
  Bmw is recalling certain model year 2007-2008 k1200 s, k1200 r, and k1200 r sport motorcycles and 2012 and 2013 k1300 s motorcycles. In october 2012, bmw recalled 2062 2007-2008 k1200 s, k1200 r, and k1200 r sport motorcycles. In november 2012, bmw informed the agency that it was adding model year 2012 and 2013 k1300 s (including hp limited edition) motorcycles to the recall campaign, representing an additional 421 units. The total number of motorcycles being recalled is now 2,483. In certain riding conditions, the brake fluid in the front brake fluid reservoir can foam.
  the front brake fluid reservoir will be retrofitted with a screen insert, free of charge. The recall began on december 19, 2012. Owners may contact bmw at 1-800-525-7417 or email bmw at [email protected].
  this recall is an expansion of safety recall 09v-202.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 69943 [USA]: This could affect the handling of the motorcycle increasing the risk a driver may lose control of the vehicle resulting in a crash.
  Bmw is recalling certain model year 2005-2011 motorcycles. The bearings could be subject to corrosion. This could lead to reduced movement of the link lever.
  bmw will notify owners and dealers will repair the vehicles free of charge. The safety recall is expected to begin during march 2011. Owners may contact bmw at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 78748 [USA]: If this occurred, the steering damper could become stiff increasing the risk of a crash.
  Bmw is recalling 428 my 2007 f800 s, f800 st, r1200 r, k1200 s, k1200 r, k1200 r sport, and k1200 gt motorcycles. It is possible for the coating to separate from the inside face of the steering damper housing. If this happened, the coating could partially clog the oil bores within the damper.
  dealers will replace the steering damper free of charge. The recall began during september 2008. Owners may contact bmw at 1-800-831-1117.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 72337 [USA]: Air in the brake system can lead to a loss of braking capability, increasing the risk of a crash.
  On certain motorcycles, during long periods of riding at sustained high engine rpm, vibration within the brake fluid reservoir can cause the brake fluid to foam. This could allow air to enter the front brake system which could lead to a loss of front braking efficiency.
  dealers will bleed the front brakes and install a damper weight in the brake fluid reservoir. This weight will dampen possible vibrations that can cause foaming of the brake fluid. The recall began on december 14, 2007. Owners may contact bmw at 1-800-831-1117.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 33029 [USA]: It is possible that a pressure build up in the oil tank could cause it to rupture, allowing oil to leak onto the rear tire. an oil leak could cause a fire. oil on the rear tire could cause loss of control.
  On certain motorcycles, frequent short trips particularly during cold temperatures, can cause water to accumulate in the oil tank, and when the engine is running, escaping water vapor can condense on the oil tank air bleed valve. In freezing temperatures, this water could freeze and block the air bleed valve.
  dealers will install a new oil tank cap containing a valve to prevent overpressure in the tank free of charge. The recall began on april 10, 2007. Owners may contact bmw at 1-800-831-1117.
  customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 2020437 [Canada]: Fuel supply
  Issue: on certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: this recall only affects motorcycles that did not have the fuel pump replaced under transport canada recall 2013-442. Safety risk: a fuel leak can create the risk of a fire. Corrective actions: bmw will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.

  Show Content

• Recall 2017428 [Canada]: Lights and instruments
  Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of canada motor vehicle safety standard (cvmss) 108 - lighting system and retroreflective devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.

  Show Content

• Recall 2015101 [Canada]: Powertrain
  On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the aluminum rear wheel flange with a steel flange.

  Show Content

• Recall 2013442 [Canada]: Fuel supply
  On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.

  Show Content

• Recall 2012334 [Canada]: Brakes
  On certain motorcycles, vibration, particularly on a long ride at constant high engine rpm and on engine overrun at high rpm, can, under certain circumstances, cause foaming of the brake fluid in the reservoir of the front brakes. This foaming may cause air to enter into the brake system, which can severely diminish the braking efficiency of the front brakes. Extended stopping distance may result in a vehicle crash causing property damage and/or personal injury. Correction: dealers will install a screen insert into the front brake fluid reservoir.

  Show Content

• Recall 2010395 [Canada]: Suspension
  On certain motorcycles, due to environmental conditions, the bearings of the link lever attached to the rear strut could be subject to corrosion. This could lead to reduced movement of the link lever. Over time, if the corrosion became significant, restriction of movement of the link lever could occur. This could affect handling of the motorcycle. In an extreme case, this could result in the connecting rod breaking by a bending force, causing the rear wheel to decelerate by contact with the inner fender. This could lead to a crash depending on traffic, road conditions and rider's reactions. Correction: dealers will replace the rear suspension relay lever.

  Show Content

• Recall 2008267 [Canada]: Steering
  On certain motorcycles, it is possible for the coating to separate from the inside face of the steering damper housing. If this happens, the coating could partially clog the oil bores within the damper. Should this occur, the steering damper could become stiff, making it difficult to steer, and therefore could result in a vehicle crash causing personal injuries or death. Correction: dealers will inspect and, if necessary, replace the steering damper.

  Show Content

• Recall 2007019 [Canada]: Engine
  On certain motorcycles, frequent short-trip usage, particularly at low ambient temperatures, causes condensation, increasing the proportion of water in the engine oil. The water vapour produced while the engine is running condenses at the outlet port of the dry-sump oil tank breather. If temperatures are below 0 degrees celsius, the condensation can freeze and plug the breather line of the oil tank. As a result, oil tank over-pressurization can cause the tank to rupture, allowing oil to escape onto the rear wheel and create the risk of a crash causing injuries or death. Correction: dealers will install an updated oil cap with a pressure relief valve.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Fuel leak - motorycle investigation # EA13006

  Odi began investigating this issue after owners of model year (my) 2004-2011 r-series bmw motorcycles reported incidents of pressurized fuel leakage from the fuel pump flange.Some owners first became aware of the problem when their pant leg was fuel-soaked.Prior to opening our initial investigation on november 16, 2012, bmw had concluded that the small number of warranty claims and owner reports did not indicate the existence of a safety defect trend.However, during the course of responding to our information requests, bmw re-examined its data and decided to conduct a recall (13v-617) of the subject motorcycles.In conducting recall 13v-617, bmw voluntarily expanded the scope of affected vehicles from odisoriginal scope, my2005-2008 r-series motorcycles, to include the primary and auxiliary fuel pumps on all my 2005-2011 r-series, my 2005-2011 k12&13 models, my 2010-2011 rr models, and the my 2012 k1600 motorcycles.The total number of motorcycles subject to this recalled is 50,184.The 55 reports cited in this investigation can be viewed at: http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following complaint identification numbers:10485789,10449393,10521322,10475150,10435325,10493015,10471642, 10448216,10488899,10356156,10433733,10442023,10492342,10435968, 10492961,10504324,10485882,10433013,10453738,10474390,10417320, 10485276,10444876,10508150,10485807,10492118,10491835,10425962, 10430734,10488652,10485274,10493320,10522421,10399423,10443840, 10448325,10490417,10485452,10433589,10467136,10420291,10503806, 10532145,10523763,10523626,10425514,10354202,10437222,10444742, 10454834,10532172,10487624,10435984,10452476, 10485337
  

  Show Content

There is a factory fuel strip that causes the fuel gauge to give an improper reading. It shows half full when there isn't any gas left and gives no warning. It has caused me to stall in heavy traffic two times and once i was almost hit doing 60 mph.

Abs pump failed. *tr

2007 bmw k1200. Consumer writes in regards to a defective abs modulator system. *smd the consumer stated just weeks out of the dealership, the brake failed completely, and a red light started flashing rapidly. He took the bike to the dealer, where they kept it for two weeks. A service rep from bmw examined the bike, and was unable to diagnose the problem. The brake failure was an intermittent event, that was very difficult to repeat. He took the vehicle in for service, and the service rep informed him the culprit was a faulty rear brake switch. As it turned out, the problem was mis-diagnosed. The real problem, the service rep later discovered was a defective abs modulator. The consumer stated because of poor judgment from bmw headquarters, the job was never approved to replace the abs modulator and the consumers warranty has since expired. *jb updated 09/17/14. *jb

My fuel gauge is once again reading completely empty even though i've only gone 40 miles on the current tank which has a range of about 240 miles. I just had the 5th fuel strip sensor in my tank replaced by my local dealer. Bmw is well aware of the problem yet does nothing, except say they are sorry. *jb

Tl* the contact owns a 2007 bmw k 1200 r sport motorcycle. The contact stated that there was a strong gasoline oder coming from the vehicle. Upon inspection, the contact noticed that there was gasoline leaking from the fuel pump. The vehicle was towed to a dealer where it was diagnosed that the fuel pump assembly was leaking and needed to be replaced. The manufacturer was notified of the failure and stated that the vehicle was not included in nhtsa campaign number: 13v617000 (fuel system, gasoline). The vehicle was repaired. The approximate failure mileage was 10,122 and the current mileage was 13,000.

Fuel was hemorrhaging all over the left side of the motorcycle when i parked it after a short ride. I noticed a trail of fuel where i went down the street. I had just topped off and was down to half a tank (approx. 2.5 gallons) in about ten miles. Smoke was pouring off of the engine and the smell of fuel was overwhelming. A major fire/explosion was a real possibility. After cooling the motorcycle with a garden hose and rinsing the fuel away, i removed the fairings and fuel tank. Fuel was leaking from the fuel pump/quick disconnect area. *tr

Fuel gauge read that i had fuel and i was empty. Motorcycle stalled lost power while overtaking another vehicle. Could have been fatal!! -faulty fuel tank sender-2nd time it failed!! *tt

Tl* the contact owns a 2007 bmw 1200r motorcycle. The contact was driving approximately 40 mph when the vehicle began to vibrate excessively. The vehicle was taken to an independent mechanic who stated that the failure was contributed to the power train. The vehicle was currently being repaired. The manufacturer was not notified of the problem. The approximate failure mileage was 29,853.

Total abs failure, the abs pump when out resulting in no abs braking. This issue could cause serious injury or death. Bmw has been make aware of this issue, and is addressing each instance with a case by case decision, this is happening to too many vehicles for it go unresolved by bmw na. *tr