Bmw R1200 Gs 2009

• Recall 142622 [USA]: A fuel leak in the presence of an ignition source can increase the risk of a fire.
  Bmw of north america, llc (bmw) is recalling certain 2009-2011 k1300 (s, gt), 2010-2011 s1000 rr, 2005-2011 r1200 (gs, gs adventure, r, rt, s, st), 2006-2010 hp2 (enduro, megamoto, sport), 2005-2008 k1200 (r, r sport, s, gt), and 2012 k1600 (gt, gtl) motorcycles that were repaired under recall 13v-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.
  bmw will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began january 18, 2021. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 130624 [USA]: If other drivers cannot easily see the turn signals, there would be an increased risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain accessory turn signals manufactured for 2006-2017 r1200gs, 2007-2008 and 2010-2017 r1200gs adventure, 2017 f700gs and f800gs, 2013-2017 f800gt, 2015-2016 f800r, 2014-2017 f800gs adventure, 2014-2016 s1000r, 2015-2017 r1200r, 2016-2017 r1200rs, and 2010-2017 s1000rr motorcycles. As designed, these accessory turn signals may be insufficiently visible to other drivers, and, as such, fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 108, "lamps, reflective devices, and associated equipment."
  bmw will notify owners, and dealers will replace the turn signals, free of charge. The recall began october 25, 2017. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114884 [USA]: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain model year 2005-2010 r1200gs and r1200rt, 2006-2010 r1200gs adventure, 2007-2010 r1200r, 2007 r1200s and k1200r sport, 2005-2007 r1200st, 2008-2009 hp2 megamoto, 2006 hp2 enduro, 2008-2010 hp2 sport, 2005-2008 k1200s, 2006-2008 k1200r, k1200gt, 2009-2011 k1300s, 2010-2011 k1300r, and 2009-2010 k1300gt motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
  bmw will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on may 7, 2015. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 101398 [USA]: A fuel leak in the presence of an ignition source may result in a fire.
  Bmw of north america, llc (bmw) is recalling certain model year 2005-2011 model year r-model motorcycles, model year 2005-2012 k-model motorcycles, model year 2010-2011 s 1000 model motorcycles, and model year 2006-2010 hp2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
  bmw will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on april 16, 2014. Owners may contact bmw customer relations at 1-800-525-7417 or email bmw at [email protected].
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 68865 [USA]: If this goes unnoticed, and the brake fluid reservoir runs empty, the front brakes could fail, increasing the risk of a crash.
  Bmw is recalling certain model year 2007 through 2009 r 1200 and k 1200 series motorcycles manufactured from august 2006 through may 2009. Due to the current routing of the front brake lines, it is possible that during riding, and therefore associated vibration. The brake lines could be under strain. If the vibration/strain is significant, the brake line could split and start to develop a leak.
  bmw will notify owners and dealers will install new brake lines, containing a "sleeve" along a portion of the lines free of charge. The safety recall began on september 20, 2010. Owners may contact bmw at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2020437 [Canada]: Fuel supply
  Issue: on certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: this recall only affects motorcycles that did not have the fuel pump replaced under transport canada recall 2013-442. Safety risk: a fuel leak can create the risk of a fire. Corrective actions: bmw will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.

  Show Content

• Recall 2017428 [Canada]: Lights and instruments
  Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of canada motor vehicle safety standard (cvmss) 108 - lighting system and retroreflective devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.

  Show Content

• Recall 2015101 [Canada]: Powertrain
  On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the aluminum rear wheel flange with a steel flange.

  Show Content

• Recall 2013442 [Canada]: Fuel supply
  On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.

  Show Content

• Recall 2010204 [Canada]: Brakes
  On certain motorcycles, the front brake lines (due to its current routing) may be under strain. The vibrations that occur when the motorcycle is being ridden could cause the brake lines to develop leaks, allowing brake fluid to escape and cause the level of fluid in the reservoir of the front brake system to drop. Brake fluid leakage could result in loss of front braking capability, which could lead to a crash causing property damage, personal injury or death. Correction: dealers will replace the front brake lines.

  Show Content

• Recall 2009268 [Canada]: Fuel supply
  On certain motorcycles, the fuel pump control unit may be subject to water intrusion which, in time, will cause it to fail. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash. Correction: dealers will inspect and, if necessary, replace the fuel pump control unit.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

I was driving my motorcycle when i noticed a gas leak coming from the fitting where the fuel line goes into the fuel pump on the left side of the gas tank. This caused gas to drip directly onto the left side exhaust manifold, which could cause a fire. In the past i had an issue with the plastic quick release fuel line cracking where it screwed into the fuel pump (same location) and dripping gas directly onto the left exhaust manifold when riding it. I replaced the plastic quick release fuel fitting with a metal one from the same manufacturer to correct the issue. Checking with others online, i have discovered that both of these issues are known, common problems on this model.

Multiple fuel strp failures, resulting in loss of fuel related warnings.

The fuel pump flange connection is cracked and leaking fuel. There are multiple pictures videos and threads regarding recalls for the exact same fuel leak that i am experiencing on the internet. However when i called bmw of north america they tell me that my motorcycle is not included in the recall. Clearly this type of fuel leak represents a fire hazard and direct life safety issue. My question is how can my particular motorcycle be excluded from this well publicized bmw recall situation ?? Fortunately i discovered the fuel leak in my garage and not while going 70 mph down the interstate

I was accelerating on the on-ramp to merge in to the slow lane with heavy traffic on the 80 north bound heading home. I had just shifted the motorcycle in to 3rd gear when it lost all power and started slowing down. The next exit was not available to reach safely and my only option was to coast into the side emergency lane. As i was investigating the issue a small plastic pulley form the left side throttle-body fell to the ground. I'm currently contacting bmw motorcycles as this was a serious safety issue that put me in harms way. This plastic piece is under constant tension and in my opinion should never have been make of plastic.

Fuel level sensor failure twice. Unable to determine level of fuel in take while driving and stopped. Increased risk of running out of gas in traffic.

Traveling approx 60 mph during rush hour in middle lane of three lane divided highway. Fuel gauge showed two bars and display indicated approx 60 miles of range left. Engine suddenly lost power. I was able to get to right shoulder when engine died and would not restart. Was able to push approx 1/4 mile to exit ramp and then to fuel station. Fuel tank was empty. Fuel gauge never showed empty nor did low fuel light come on. *tr

Tl* the contact owns a 2009 bmw 1200 gs motorcycle. The contact stated that while driving 60 mph, the rear final drive bearing became separated. The contact was able to stop the motorcycle with the front brake. The manufacturer was made aware of the failure. The rear final bearing was replaced. The failure and current mileage was 42,182. Updated 01/07/014*lj updated 1/17/2014 *js

Fuel gauge suddenly failed and gave inaccurate reading. I have had the fuel gauge replaced 4 times, most recently less than one month ago, always by a bmw dealer. That most recent gauge, installed 6/7/2014 by the dealer, failed completely, without warning, on 7/3/14 after less than 250 miles. The fuel gauge failure can lead to sudden unexpected loss of power, if the gauge indicates fuel remaining, while in fact the tank is empty. I am astonished the government has not ordered bmw to find a reliable fix this. Anecdotal indications are thousands of gauges have failed, over approximately a five model year period the defective design was used. *tr

There had been many motorcycle complaint on suspension leaking problems, with very low miles on. And bmw is not responding for this failure. *tr

Common OBD-II Error Codes

• P1200 [3] SCP HBCC Failed To Initialize