Bmw R1200 Gs 2015

• Recall 139731 [USA]: The darker windscreen can inhibit the driver's visibility, increasing the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain accessory windscreens, sold for installation on various motorcycles. Specifically being recalled is windscreen model number 8531917, sold for use on model year 2012-2018 f700gs motorcycles, windscreen model number 8544629, sold for use on model year 2015-2018 r1200r motorcycles, windscreen model number 8546224, sold for use on model year 2014-2018 s1000r motorcycles, windscreen model number 8551929, sold for use on model year 2015-2018 s1000xr motorcycles, windscreen model number 8554726, sold for use on model year 2013-2018 r1200gs motorcycles, windscreen model number 8554727 sold for use on model year 2014-2018 r1200gs adventure motorcycles, windscreen model number 8556927, sold for use on model year 2015-2018 r1200rs motorcycles, windscreen model number 8559548, sold for use on model year 2017-2018 r1200gs motorcycles and windscreen model number 8561755, sold for use on model year 2012-2018 f800gs motorcycles. These windscreens have extra tinting on them that may reduce the rider's visibility. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 205, "glazing materials."
  bmw will notify owners, and dealers will replace the windscreen, free of charge. The recall is expected to begin may 10, 2018. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 130631 [USA]: If other drivers cannot easily see the turn signals, there would be an increased risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain accessory turn signals manufactured for 2006-2017 r1200gs, 2007-2008 and 2010-2017 r1200gs adventure, 2017 f700gs and f800gs, 2013-2017 f800gt, 2015-2016 f800r, 2014-2017 f800gs adventure, 2014-2016 s1000r, 2015-2017 r1200r, 2016-2017 r1200rs, and 2010-2017 s1000rr motorcycles. As designed, these accessory turn signals may be insufficiently visible to other drivers, and, as such, fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 108, "lamps, reflective devices, and associated equipment."
  bmw will notify owners, and dealers will replace the turn signals, free of charge. The recall began october 25, 2017. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 130358 [USA]: If the rear reflex reflectors are obscured from view, it can increase the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain 2013-2017 f800r and f800gt motorcycles, 2014-2018 r1200gs and r1200gs adventure motorcycles, 2016-2017 s1000xr motorcycles and 2015-2017 r1200r and r1200rs, 2008-2012 f650gs, 2008-2018 f800gs, and 2014-2017 f800gs adventure motorcycles. When equipped with the optional aluminum luggage cases, the rear reflex reflectors may be partially blocked. The aluminum case mounts for the r1200gs and r1200gs adventure may also partially block the reflectors. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 108, "lamps, reflective devices, and associated equipment."
  bmw will notify owners, and dealers will install reflectors on the cases or for the case mounts, an additional bracket with rear reflex reflectors, free of charge. The recall began october 16, 2017. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 125255 [USA]: If the fork tube detaches from the sealing plug, the handling and stability of the motorcycle will be affected, increasing the risk of a crash.
  Bmw of north america, llc (bmw) is recalling certain 2014-2017 bmw r1200gs and bmw r1200gs adventure motorcycles. The motorcycle fixed fork tube may separate from the pressed in seal plug that secures the tube to the upper triple clamp.
  bmw will notify owners, and dealers will add an additional fixed fork tube bush. A fork that is sufficiently damaged will be replaced with a modified new part. These repairs will be made free of charge. The recall began august 31, 2017. Owners may contact bmw customer service at 1-800-525-7417.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall RM/2017/020 [UK]: Front suspension could fail
  The fixed fork tube can suffer preliminary damage due to unusual incidents with momentary high stress without the user noticing the damage. Through longer usage with high stress the pressed in seal plug can loosen. This usually leads to oil leaks a clacking noise as well as increasingly imprecise drivability. If these signals are not perceived or ignored and further high stress incidents occur the plug may become completely loose. Subsequently critical driving conditions cannot be ruled out.
  recall the machines that are likely to be affected and retrofit with an additional fixed fork bush or ? If the preliminary damage is too much ? The fixed front tubes are replaced by appropriately modified new parts.

  Show Content

• Recall 2018159 [Canada]: Accessories
  Certain tinted windshields sold as accessories through bmw dealerships may fail to comply with the requirements of canada motor vehicle safety standard (cmvss) 205 - glazing materials. The windshields may contain extra tinting in certain areas, which would be contrary to the requirements of the standard and could potentially limit the driver's visibility, increasing the risk of a crash. Correction: dealers will replace the tinted windshield with one that meets the standard's requirements.

  Show Content

• Recall 2017428 [Canada]: Lights and instruments
  Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of canada motor vehicle safety standard (cvmss) 108 - lighting system and retroreflective devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.

  Show Content

• Recall 2017376 [Canada]: Other
  Certain motorcycles may not comply with the requirements of canada motor vehicle safety standard (cvmss) 108 - lighting system and retroreflective devices. The rear side reflectors on the luggage case or luggage case mounts may be partially blocked and not meet the requirements of the standard, which could reduce vehicle conspicuity to following road users, and increase the risk of a crash causing injury and/or property damage. Correction: depending on the model, dealers will either attach a side reflector to the luggage case, or add a bracket containing a rear side reflector.

  Show Content

• Recall 2017343 [Canada]: Suspension
  On certain motorcycles, the upper fork seal plug could loosen after severe impact, such as a large pot hole or an accident. Loose fork seal plugs may not be noticeable by the rider. This could result in oil leaks, a rattling noise and unstable steering. If operated in this condition, the plugs could separate, affecting vehicle handling. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will fit an additional fixed fork bushing, or replace the forks with an improved design, as necessary.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Rear brakes just go out. No warning. I checked a forum and it is an issue with multiple years. No recalls. You just lose your rear brakes completely. I noticed after a short trip this weekend. You can tell when riding or still. Here is a bmw forum with complaints. Https://advrider.Com/f/threads/bmw-r1200gs-lc-rear-brake-failures.1264712/

Rear brakes just go out. No warning. I checked a forum and it is an issue with multiple years. No recalls. You just lose your rear brakes completely. I noticed after a short trip this weekend. You can tell when riding or still. Here is a bmw forum with complaints. Https://advrider.Com/f/threads/bmw-r1200gs-lc-rear-brake-failures.1264712/

Rear brake fails due to air in the system while riding. No fluid leaks foot pedal becomes soft then no brake at all.

Rear brake fails due to air in the system while riding. No fluid leaks foot pedal becomes soft then no brake at all.

I am a long-time motorcycle owner/rider (50 yrs) and have worked professionally as a motorcycle mechanic.Since new my 2015 bmw r1200 gs adventure's rear brake accumulates air bubbles in the system causing a "soft" rear brake pedal reducing braking performance. Every 1 to 2,000miles i have to bleed the rear brake fluid to remove the air bubbles and get the brake pedal and rear brake to operate normally again. I now have 38,000mi on the odometer and have had to perform this brake bleed procedure many times! This is unacceptable and a very dangerous condition! I have spoken to my local authorized bmw motorcycle dealer about this and they do not know about this condition and are guessing as to the cause. My opinion is that there is a defect in the brake system that is allowing air to enter the hydraulic system. I suspect the rear brake slave cylinder is defective from the factory.

Control buttons on left handlebar failing affecting cruise control, suspension settings, and ride mode which affects engine performance. Button failures occur just outside of warranty and when motorcycle is in operation and suspension and engine control systems are operational.

Bmw motorcycle recall campaign 17v-438 - front fork. I received a recall notice from bmw in august 2017 and sent the motorcycle to the dealer to have the warranty/recall repair conducted. The motorcycle has been at morton's bmw in fredericksburg, va since 09 september and bmw has still not sent the dealer the repair parts. I sent bmw of north america a detailed email on 24 september and they have yet to respond and explain why they will not fix my motorcycle within a reasonable period of time.

Tl* the contact owns a 2015 bmw r1200 gs. The contact received notification of nhtsa campaign number: 17v438000 (suspension) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. An unknown bmw dealer of manhattan, new york was made aware of the recall and stated that the parts were unavailable. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Part distribution disconnect. The vin was not available.

When you apply the rear brake, the brake pedal gets mushy to the point it will not stop the vehicle