Dodge Neon 2003

• Recall 83306 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by sabersport.The list can be found under "document search" located at the bottom of your screen.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 79614 [USA]: Without the amber side reflex reflectors, the lighting visibility may be affected, possibly resulting in a vehicle crash.
  K2 motor is recalling 1,921 aftermarket headlamps of various models sold for use on the above listed vehicles. These headlamps are missing the amber side reflex reflector which fails to conform with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
  k2 motor will notify owners and offer a full refund. The recall began on decemeber 17, 2008. Owners may contact k2 motor at 1-909-839-2992.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by honda, ford, or chrysler llc. Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 80465 [USA]: The nuts included in the packaging for these ball joint assemblies are missing the intended prevailing torque (self-locking) feature. if the incorrect nut was to become loose, the joining members may loosen leading to a separation of the ball joint. this may result in loss of vehicle control, possibly resulting in a vehicle crash.
  Federal mogul is recalling 6,903 aftermarket ball joint assemblies shipped between november 9, 2007 and march 26, 2008, which may have been packaged with incorrect nuts. The part numbers packaged with incorrect nuts are: k7147, k7329, k8683, and 104353. These parts were made for use on the various vehicles listed above.
  federal mogul will notify owners and replace the parts free of charge. The recall began on may 22, 2008. Owners can contact federal mogul at 877-489-6659.
  this recall only pertains to aftermarket ball joint assemblies and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 51196 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Dodge Neon 2003 as well as their FCC IDs if available

• R-CHY-9T-4: 1998-2011 Dodge Neon / 4-Button Keyless Entry Remote / PN: 4759008AA / GQ43VT9T (AFTERMARKET)
  FCC ID: GQ43VT9T

• Headlight failure investigation # EA06019

  There is no summary currently available
  

  Show Content

• Safety belt cinching latch plate investigation # PE02082

  Alleged cinch clip within the latch plate breaks when under load
  

  Show Content

This makes 3rd transmission that has been put in this 2003 dodge neon xst . I have put $10.000.00 in transmission replacements ! These are lemons!! I will never buy another dodge!!

Tl* the contact owns a 2003 dodge neon. While driving 40 mph, the contact heard a loud grinding noise coming from the front end of the vehicle. The contact pulled over to the side of the road and noticed that the front subframe was fractured. The failure occurred without warning. The vehicle was not taken to the dealer for diagnostic testing and repairs. The manufacturer was not contacted. The approximate failure mileage was 103,421.

We were hit from the side and tore up the whole front end. The air bags did not deploy

Tl* the contact owned a 2003 dodge neon. While driving approximately 45 mph, the contact crashed into a guardrail. Neither of the front air bags deployed. There were no injuries and a police report was filed. The vehicle was destroyed and towed to an impound yard. The manufacturer was not notified of the failure. The vin was unknown. The approximate failure mileage was 140,000.

Oil problem although i paid thousands for repairs.-but the engine light flashes when car is stopped at a traffic light or idling for even a short time. When car is in motion, a steady engine light is on all the time, except when it flashes. This has been happening for a couple of years. I need info on this and all recalls or complimentary repairs available . I need to be safe .Thank you. *tr

Well i was driving and i had my kid in car 10-16-15 thank god i a had arrived home on time who knows what would happen if i kept driving i started to see smoke coming of dash i was on street coming from janesville wi it's like 35 min away i was driving on high way but like i said it started happening while approaching house i really don't know how to see inside but this has me shocked due to video i have seen catching on fire why isn't nothing being done no recall nothing someone can die from this i looked up problem and it's a common thing thats happening this is a serious problem and disappointed with dodge i need something done about this please help i took a picture of when i parked it.

Started vehicle during rainy, foggy, 40 degree weather. Headlamp indicator did not come on within gauge cluster. Upon checking outside the car, only parking lights were functioning despite headlights switch being in the "on" position. Burning smell occurred within 15 minutes of driving and multifunction harness connector is melted. *tr

Odor of burning plastic, caused by overheated wiring (pin 16) on turn signal and light control. Light would only function on low beam ; while high beam indicator was lit . Fog lamps have been lit ,when switch is headlamp on position, for three years. They could not be turned off unless you used left turn signal. When headlamp malfunctioned i bought replacement switch. During installation, found wiring harness terminal was difficult to remove, as it was malformed and brittle due to excess heat. I took pictures to document wire position; there is no pin 15 or 10 : also no wire to terminal positions 15,10, and 12. There is a pin 12 on the switch. *tr

As i was driving down the road with my lights on, i began to see and smell smoke coming from steering column. I turn the lights off and the smoke cleared up and went away. After some time, i turned the lights back on with no problem to be found at this time. A week or so later the headlight switch would not work unless you pulled the high beam switch, then and only as you held the switch the lights would work. ( if you have never sit and held the switch while driving at night ( of course ) to get home it is no fun. ) that week end i pulled the covers off the column and pulled the harness out of switch to find it was melted. Needless to say i am down a vehicle until this is fixed. Luckily there was no fire. *tr

Common OBD-II Error Codes

• P1776 [2] Torque Converter Clutch Circuit Malfunction
• P0016 [3] Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
• P0622 [2] Generator Field "F" Control Circuit Malfunction
• P0522 [2] Engine Oil Pressure Sensor/Switch Circuit Low Voltage
• P0462 [3] Fuel Level Sensor Circuit Low Input
• P0498 [3] Evaporative Emission System Vent Valve Control Circuit Low
• P0499 [3] Evaporative Emission System Vent Valve Control Circuit High
• P0335 [3] Crankshaft Position Sensor A Circuit Malfunction
• P0339 [3] Crankshaft Position Sensor A Circuit Intermittent
• P0340 [3] Camshaft Position Sensor Circuit Malfunction (Bank 1)
• P0116 [1] Engine Coolant Temperature Sensor Circuit 1 Range/Performance Problem
• P1604 [2] TCU Unable To Control Desired Throttle Angle
• P1681 [1] Fuel Demand Command Signal Circuit Malfunction