2018 FORD F-59Ford F-59 2018

Vehicle Details: Service Bulletins

Below you will find all available information on the 2018 FORD F-59.

ManufacturerKnown WMI(s)Fuel Type
FORD
FORD VIN Decoder

Use the box here to look up VINs from FORD as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SAN-Vol1 I1 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: The service awareness newsletter is an informal communication that contains information that may not be presently available in a tsb, ssm, gsb, or other electronic communication. This article includes information on warranty, technical serv
  • SSM 48123 - ELECTRICAL SYSTEM: For ford and lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp bt4z-14450-aa a
  • SSM 47976 - POWER TRAIN: On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with motorcraft multi-purpose grease spray xl-5-a even if grease was not applied from the factory. Also verify that the engine/tran
  • SSM 47823 - POWER TRAIN: Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (mil) with diagnostic trouble code (dtc) P264F after powertrain control module (pcm) replacement. This dtc indicates that the engine serial number (esn) must b
  • SSM 47009 - EQUIPMENT:ELECTRICAL: The accessory (wireless) keyless entry keypad can only be used with vehicles that are factory built with remote keyless entry (rke). The master code for the accessory (wireless) keyless entry keypad can be retrieved from fmcdealer - parts a
  • SSM 46900 - ELECTRICAL SYSTEM: Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (mil) and a dtc P161A after pcm replacement. This may be due to the parameter reset procedure not being properly completed. To clear this dtc, use

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.