SSM 46900
Service Bulletin Details
Public Details for: SSM 46900
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (mil) and a dtc P161A after pcm replacement. This may be due to the parameter reset procedure not being properly completed. To clear this dtc, use
- 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2018
Models from 2017
Models from 2016
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
| 2010 FORD E-150 |
| 2010 FORD E-250 |
| 2010 FORD E-350 |
| 2010 FORD E-450 |
| 2010 FORD EXPEDITION |
| 2010 FORD F-150 |
| 2010 FORD FLEX |
| 2010 FORD TAURUS |
| 2010 LINCOLN MKT |
| 2010 LINCOLN NAVIGATOR |
Models from 2009
| 2009 FORD E-150 |
| 2009 FORD E-250 |
| 2009 FORD E-350 |
| 2009 FORD E-450 |
| 2009 FORD EXPEDITION |
| 2009 FORD F-150 |
| 2009 LINCOLN NAVIGATOR |
SSM 46900 Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.