Harley-davidson Flstc 2010
Vehicle Details: Consumer Complaints, Service Bulletins
Below you will find all available information on the 2010 HARLEY-DAVIDSON FLSTC.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
HARLEY-DAVIDSON |
Use the box here to look up VINs from HARLEY-DAVIDSON as well as other manufacturers
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- M1612 - UNKNOWN OR OTHER: Service bulletin m1612 (rev a): milwaukee-eight and twin cam transmission gear packs. Purpose: revision. Update: notes for table 3 and 4. * updated: part numbers. This bulletin informs dealers that all: twin cam gear packs on cvo, dyna, po
- PAB1146 - EXTERIOR LIGHTING: Genuine motor parts and motor accessories bulletin paB1146: 68193-95 bulb wedge, fender tip lamp. Purpose: to inform dealers of an issue with the bulb wire terminals not being to specification. The light bulbs were used in numerous front an
- M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: ??A?A? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and ??A?A? Milwaukee-eight gear
- M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: a?? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and a?? Milwaukee-eight gear packs
- M1328 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: Service bulletin m1328: fuel filler neck emissions recall 0613. Purpose: harley-davidson motor company has determined that upon exposure to certain types of fuel formulations and/or high ambient temperatures the gas cap may develop a fitmen
- PAB1100 - ENGINE AND ENGINE COOLING: Genuine motor parts and motor accessories bulletin paB1100: twin cam longblock & warranty engine - program updates. Purpose: to inform dealers of certain twin cam longblock and twin cam warranty engines are no longer supported. Instead, sho
- PAB1084 - EQUIPMENT: Genuine motor parts and accessories bulletin paB1084: softail backrest pad improvements. Purpose: to inform dealers of design improvements for the compact passenger backrest pads. Some of these pads can become loose resulting in the backre
- 1HDY3S9Z01 - FUEL SYSTEM, GASOLINE: Service bulletin m1485: 2000 - 2017 softail - fuel tank gasket. Purpose: service fuel tanks for softail motorcycles are now being updated to include a top plate gasket (part no. 61381-02a) with all new replacement tanks. Harley-davidson s
- 1HDM5V2A05 - POWER TRAIN: Tech article ta0023: ta0023: crankshaft rod bearing. Purpose: technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the twin cam and milwaukee
- 1HD-C6F3G-12 - ENGINE (PWS): This document will outline inspection and measurement procedures for gerotor style oil pumps. It provides inspection procedures only without specifications.
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
No | No | N | None | None | 20130714 |
I was driving down a hill and i let up on the accelerator. The bike began to move side to side under me. When i began to accelerate it smoothed out. I took the bike to my local harley mechanic. He lifted it up to find the rear spokes completely loose. He tightened them up and it was fine for a while but i continued to periodically check and tighten the spokes. A friend had a 2005 flstc with 45000 miles he purchased new and never had to tighten the spokes. My mechanic has been a harley mechanic for 30 years and used to own his own dealership. He said there is no way the should have come that loose in that few miles. *tr