2011 HINO 238Hino 238 2011

Vehicle Details: Service Bulletins

Below you will find all available information on the 2011 HINO 238.

ManufacturerKnown WMI(s)Fuel Type
HINO
HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 167-T2301-2 - EQUIPMENT ADAPTIVE/MOBILITY: Dx3 vehicle speed and cruise settings. Tt-23-006
  • 167-T1001-12 - STRUCTURE: Improper body u-bolt installation on right side, near fuel lines.
  • SB-15-014 - EQUIPMENT ADAPTIVE/MOBILITY: Correction of workshop manual for 2011my-2014my (addition and correction of burner system)
  • SB-14-029 - EQUIPMENT: Correction of workshop manual for 2011 - 2015 my (revision of troubleshooting procedure for the dtc P2201 & P2214)
  • SB-14-028 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.
  • SB-14-007 - EQUIPMENT: Addition of the troubleshooting procedure for the inspection procedure for auto regeneration is possible but not manual regeneration.
  • SB-14-003 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the revision of the inspection procedure for the dtc?S P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for serv
  • SB-15-031 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Conventional trucks (238, 258, 268 or 338) and coe (cab over engine) trucks (195, 195h) foreign debris in the def (diesel exhaust fluid) tank may cause the scr (select calalyst reduction) system to malfunction. This can result in dtc's (dia
  • SB-11-005 - FUEL SYSTEM, DIESEL: The breather hose can clog up with crystallized def, which can cause the def to overflow from the tank when filling and not allow the tank to be completely filled. In this case, clean the breather hose in accordance with the following proce
  • 10-001 - STRUCTURE:FRAME AND MEMBERS: The following is to inform you of the correction made to the workshop manuals listed below. Please add this bulletin to the relevant pages (listed below) within your workshop manuals.
  • HINO SB 12-001 - FUEL SYSTEM, GASOLINE: Correction of 2011my workshop manual (addition of tightening torque for def injector mounting bolt)
  • HINO SB-12-002 - EQUIPMENT: Condition: many flame temperature sensors are being replaced for burner failure (as shown below) but in many cases the sensor itself is not the issue. Please follow the guidelines in this bulletin to determine whether the sensor should be
  • 167-T1609-12 - SUSPENSION: Tt-16-010 air spring shield
  • 167-T1606-12 - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH: Tt-16-005 the purpose of the tech tip is to provide information for a low power concern possibly relating to the brake switch. Hino trucks are equipped with two brake switches. First, a stop lamp switch that is designed to activate stop lam
  • 167-T1602-12 - VEHICLE SPEED CONTROL: Tt-15-031 the tech tip below is to set or change road speed on a hino conventional or coe truck. The below procedure and screen shots were taken from a conventional truck. Make sure to select 600 series for a conventional and 300 series for
  • 167-T1601-12 - EQUIPMENT: Tt-15-013 to provide a better determination of a dpf?S internal condition, a special service tool (sst) has been developed. An explanation of sst-hdt-650590 and a brief dpf inspection follows below.
  • 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
  • 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
  • 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
  • 167-B1101-12 - FUEL SYSTEM, OTHER: Sb-11-002 requirements of biofuel usage for 2008my thru 2012my vehicles all applied models
  • 167-A1501-12 - STRUCTURE:BODY:HOOD: Sb-15-045 fiberglass repair methods have been made available to address hood crack concerns. In the event a subject vehicle experiences cracking of the hood near the hinges, this repair procedure should be used to address this condition. Wh
  • 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
  • 167-B1529-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-032 troubleshooting information and inspection procedure of the dtc/P2030 were revised.
  • 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
  • 167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
  • 167-B1521-12 - SUSPENSION: Sb-15-022 in the rare event that a subject vehicle equipped with the 23k comfort ride air suspension experiences a premature main leaf failure, a 23k hd comfort ride air suspension may be installed with prior approval from hmm qa.
  • 167-B1518-12 - STRUCTURE:BODY: Sb-15-019 reinforcement brackets and fiberglass repair methods have been made available to address hood crack concerns. In the event a subject vehicle experiences cracking of the hood near the hinges, this repair procedure should be used
  • 167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
  • 167-B1415-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-003 the following is to inform you of the revision of the inspection procedure for the dtc?S P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
  • 167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
  • 167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-T1303-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 13-003 injection quantity test 11 thru 14my
  • 167-T1202-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 12-001 recording the burner event log (bel) on 11-13my trucks
  • 167-P1602-12 - FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP: 13-008 injection pump drive case. Please note the following part number changes to the injection pump bearing case. Not replacing the correct replacement parts will result in major engine damage. The hino ordering system has been modified

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.