2012 HINO JHD2Hino Jhd2 2012

Vehicle Details: Service Bulletins

Below you will find all available information on the 2012 HINO JHD2.

ManufacturerKnown WMI(s)Fuel Type
HINO
HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
  • 167-T1513-12 - POWER TRAIN: Tt-15-014 the transmission dtc?S P0974 and P0986, may be found on 12my-15my coe models. There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case an
  • 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
  • 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
  • 167-B1310-12 - EQUIPMENT:MECHANICAL: 13-012 correction of wire harness color for turbine speed sensor of aisin atm on workshop manual for 12my and 13my.
  • 167-B1101-12 - FUEL SYSTEM, OTHER: Sb-11-002 requirements of biofuel usage for 2008my thru 2012my vehicles all applied models
  • 167-B1630-12 - ENGINE (PWS): Sb-16-029 correction of workshop manual for hino300 series detailed explanation of the fuel pipe installation
  • 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
  • 167-T1417-12 - ELECTRICAL SYSTEM:WIRING: Tt-14-018 when disconnecting one of the inline chassis harness connectors on the vehicle, there is potential that the white connector lever may break due to degradation of the white plastic material. In the event that the connector lever d
  • 167-B1614-12 - EQUIPMENT: Sb-16-001 subject vehicles may exhibit a broken dpf shield mounting bracket due to corrosion perforation. An enhanced dpf shield bracket made from stainless steel is now available to prevent this condition from recurring.
  • 167-B1529-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-032 troubleshooting information and inspection procedure of the dtc/P2030 were revised.
  • 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
  • 167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
  • 167-B1521-12 - SUSPENSION: Sb-15-022 in the rare event that a subject vehicle equipped with the 23k comfort ride air suspension experiences a premature main leaf failure, a 23k hd comfort ride air suspension may be installed with prior approval from hmm qa.
  • 167-B1520-12 - EQUIPMENT: Sb-15-020 correction of workshop manual for hino 155, 195, 155h, 195h (revision of troubleshooting procedure for the dtc P0A78 (tc15)
  • 167-B1519-12 - EQUIPMENT: Sb-15-020 correction of workshop manual for hino 155, 195, 155h, 195h (revision of troubleshooting procedure for the dtc P0A78 (tc15)
  • 167-B1511-12 - STEERING: STEERING WHEEL/HANDLE BAR: Sb-15-011 the following tsb (technical service bulletin) outlines the inspection method for steering wheel free play and the adjustment procedure of the steering gear.
  • 167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
  • 167-B1503-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-002 correction of workshop manual for 2013 - 2015my (revision of troubleshooting procedure for the dtc P2123)
  • 167-B1502-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-001 correction of workshop manual for hino 155, 195,155h, 195h (revision of troubleshooting procedure for the dtc P0705)
  • 167-B1415-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-003 the following is to inform you of the revision of the inspection procedure for the dtc?S P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
  • 167-B1413-12 - FUEL SYSTEM, GASOLINE: Sb-14-010 vehicles equipped with a factory installed, side mounted round fuel tank may exhibit a clogged fuel tank breather from dirt and road debris. A clogged button style breather may cause serious engine damage. In the event that a clog
  • 167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
  • 167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1405-12 - EQUIPMENT: Sb-14-001 in the event that a cracked or broken cab step exists on the driver?S side or passenger side of the subject vehicles, a revised cab step has been released with a reinforcement pipe that will increase the robustness of the cab step
  • 167-B1405-12 - EQUIPMENT: Sb-14-001 in the event that a cracked or broken cab step exists on the driver?S side or passenger side of the subject vehicles, a revised cab step has been released with a reinforcement pipe that will increase the robustness of the cab step
  • 167-T1303-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 13-003 injection quantity test 11 thru 14my
  • 167-T1202-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 12-001 recording the burner event log (bel) on 11-13my trucks
  • 167-B1421-12 - EQUIPMENT ADAPTIVE/MOBILITY: Sb-14-008 coe hybrid safety equipment, tools and practices
  • 167-B1413-12 - ENGINE (PWS): Sb-14-010 vehicles equipped with a factory installed, side mounted round fuel tank may exhibit a clogged fuel tank breather from dirt and road debris. A clogged button style breather may cause serious engine damage. In the event that a clog
  • 167-P1602-12 - ENGINE (PWS): 13-008 injection pump drive case. Please note the following part number changes to the injection pump bearing case. Not replacing the correct replacement parts will result in major engine damage. The hino ordering system has been modified

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.