Hino Nj8j 2016
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2016 HINO Nj8j.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| HINO |
HINO VIN Decoder
Use the box here to look up VINs from HINO as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2016 HINO Nj8j?
- There are 1 recall(s) for the 2016 HINO Nj8j, additional information is below.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 167-B1904-01 - SERVICE BRAKES, HYDRAULIC: Sa-19-011 aacl0 conventional alp drum and dust shield procedure changes
- 167-B1702-11 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : All 16my-18my units that have been sold and are in service today will be addressed with a future campaign once the proper agencies have been notified and approval is received.
- 167-R1702-11 - ELECTRICAL SYSTEM:SOFTWARE: The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. Subject vehicles contain an error in the def monitoring program. To eliminate this situation, it is
- 167-R1701-11 - ELECTRICAL SYSTEM:SOFTWARE: The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. Subject vehicles contain an error in the def monitoring program. To eliminate this situation, it is
- 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
- 167-B1307-12 - POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL): 13-008 design change of the idler gear case and idler gear bolt. Abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. Therefore, an enhancement to the case and bolt were carried out. The idle
- 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
- 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
- 167-B1522-12 - EQUIPMENT:ELECTRICAL: Sb-15-025 in the event that a subject vehicle exhibits a (mil) malfunction indicator lamp and a P0128 (the coolant temperature does not reach a warmed-up temperature) is stored in the engine ecu, enhanced ecu software is available to correc
- 167-B1517-12 - EQUIPMENT: Sb-15-018 correction of workshop manual for 2016 my (correction of parking brake assembly)
- 167-B1504-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-003 correction of workshop manual for hino 2015my (revision of troubleshooting procedure for the dtc P0421)
- 167-B1503-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-002 correction of workshop manual for 2013 - 2015my (revision of troubleshooting procedure for the dtc P2123)
- 167-B0803-12 - WHEELS:LUGS/NUTS/BOLTS/STUDS: Sb - 08 - 005 this document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
- 167-B0602-12 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Sb ? 06 - 002 fuel filter usage. This bulletin provides technical information for proper fuel filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
- 167-B0601-12 - ENGINE AND ENGINE COOLING: Sb ? 06 - 001 design change of engine oil cooler housing. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
- 167-B0508-12 - POWER TRAIN:AXLE ASSEMBLY: Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
- 167-B0506-12 - ENGINE (PWS): Sb ? 05 - 008 this document is to inform the dealers about the addition of the pressure sensor cover and related part for the j08e engine.
- 167-B0505-12 - EQUIPMENT ADAPTIVE/MOBILITY: Sb ? 05 - 007 design change of water pipe for j08e
- 167-B0504-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Sb - 05 - 003 this document is to inform dealers and workshops on procedures to activate exhaust brake operation.
- 167-B0503-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb ? 05 - 010 correction to workshop manuals for the j08e engine. A) resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 ohms b) illustration of the air intake pre-heater terminal should be revised. C) r
- 167-B0502-12 - EQUIPMENT: Sb - 05 - 004 speedometer recalibration. This document is to inform of the procedure to calibrate the pulse adjust module whenneeded (ex. Tire size change, rear carrier ratio change).
- 167-B0501-12 - ENGINE (PWS): 05 - 011 corrections to workshop manuals for j08 engines. The standard gap between ends of the second piston ring and the oil ring.
- 167-R1505-12 - ENGINE (PWS): Aa0q0 a subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P2148/P2151 (malfunction of injector solenoid valve drive system common , b+ circuit). The engine ecu may falsely detect an issue and r
- 167-T1701-03 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Beginning with the 2017 model year, hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014my and newe