1990 HYUNDAI HYUNDAIHyundai Hyundai 1990

Vehicle Details: Service Bulletins

Below you will find all available information on the 1990 HYUNDAI HYUNDAI, manufacturered by Hyundai De Mexico, S.a. De C.v..

ManufacturerKnown WMI(s)Fuel Type
HYUNDAI3H3 145
HYUNDAI VIN Decoder

Use the box here to look up VINs from HYUNDAI as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 1990 HYUNDAI HYUNDAI produced?
     - The 1990 HYUNDAI HYUNDAI is produced in Tijuana B.c., Mexico.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
  • 21-EM-003H - ENGINE AND ENGINE COOLING: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
  • 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
  • 20-SS-004H - WHEELS: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the ⿿tire balance data sheet⿝ must be fully completed including imbalance and road for
  • 20-EE-003H - EQUIPMENT: This bulletin provides information on identifying dealer stock vehicles with either: ⿢ a battery soc alert - low battery state of charge (soc) at or below 50%. ⿢ a 30 day alert - vehicle has not started and reported an soc in 30 days.
  • 19-BE-011H-1 - BACK OVER PREVENTION: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
  • 970801400251 - POWER TRAIN: Diagnostic procedures on pulse generator diagnosis. *yc
  • 9740002 - POWER TRAIN:DRIVELINE:DRIVESHAFT: Shift condition caused by short circuit in inhibitor switch. *tw

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.