2023 ISUZU F-SERIESIsuzu F-series 2023

Vehicle Details: Service Bulletins

Below you will find all available information on the 2023 ISUZU F-SERIES.

ManufacturerKnown WMI(s)Fuel Type
ISUZU
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • IB24-K-001B - POWER TRAIN: Information bulletin: allison recently announced a new transmission fluid: tes 668. While allison asserts this fluid is interchangeable with tes 295 for its transmissions, it is not interchangeable for all isuzu vehicles. It is important t
  • CB23-J-004 - ENGINE AND ENGINE COOLING: Customer satisfaction campaign: in some 2022-2023my isuzu f-series trucks, the rear engine motor mounts may become loose, causing a noticeable vibration while driving. Isuzu dealers will inspect the rear engine motor mounts for this condit
  • WB23-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to an
  • CB23-J-003 - ENGINE AND ENGINE COOLING: Customer satisfaction campaign: in some 2022-2023 my isuzu f-series trucks equipped with rpo 5u5 tire size 255/70r22.5, a calibration error caused the affected vehicles to be built with an incorrect tire size value. As a result, the speedom
  • CB23-N-003 - ELECTRICAL SYSTEM: Customer satisfaction campaign: in certain 2023 model year isuzu f-series trucks the mimamori control module (mmu) was not programmed with the correct tire size value. This error does not affect the drivability or performance of the affecte
  • WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
  • WB23-X-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to an
  • IB18-N-003C - ENGINE AND ENGINE COOLING: Isuzu commercial truck of america, inc. Is distributing this procedure for adding keyless entry transmitters as a quick reference to help dealers better service the customer. Also included is the clearing procedure for customers who have ha
  • WB13-X-002G - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu is providing this bulletin to outline isuzu's policy and procedures for isuzu vehicles with tire warranty coverage. Note: after the isuzu tire warranty expires, additional coverage may be available from the tire manufacturer. Refer t
  • IB22-X-001B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Product teams continually seek valuable information for product quality and engineering improvements. For the 2023-2024 model years f-series, isuzu commercial truck of america, inc. (isuzu) will be strictly monitoring complete vehicle perfo
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • WB23-J-001 - ENGINE AND ENGINE COOLING: This bulletin describes certain additional requirements when submitting a warranty claim for radiator leaks (labor operation codes j3080, j3100, and j1840) on 2022my - current isuzu f-series vehicles.
  • IB18-N-003B - ENGINE AND ENGINE COOLING: Isuzu commercial truck of america, inc. Is distributing this procedure for adding keyless entry transmitters as a quick reference to help dealers better service customer. Also included is the clearing procedure for customers who have had t
  • IB22-N-001 - EXTERIOR LIGHTING:TURN SIGNAL: We have received reports of the front turn signal lenses cracking on isuzu vehicles. These lenses are cracking from the effects of being washed with alkaline detergents. Alkaline detergents are typically used in industrial settings an
  • IB22-X-002A - EQUIPMENT: The information below is provided to help technicians properly service the 2022my isuzu f-series vehicles equipped with the 6.7l cummins diesel engine. This bulletin also outlines the diagnostic scan tool connection requirements to facilit

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.