2018 ISUZU Npr XdIsuzu Npr Xd 2018

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2018 ISUZU Npr Xd, manufacturered by General Motors Llc.
The vehicle is described as a 4x2 MDV7 (Cal. LEV 2/3 MDV GVW 10001-14000) Single-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.).

ManufacturerKnown WMI(s)Fuel Type
ISUZU4GT 4KL JAM 54D JAL Diesel
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2018 ISUZU Npr Xd produced?
     - The 2018 ISUZU Npr Xd is produced in Fujisawa Michigan, Japan.
  • Are there recalls for the 2018 ISUZU Npr Xd?
     - There are 7 recall(s) for the 2018 ISUZU Npr Xd, additional information is below.
  • What is the GVWR of a 2018 ISUZU Npr Xd?
     - The 2018 ISUZU Npr Xd has a GVWR of Class 3: 10,001 - 14,000 lb (4,536 - 6,350 kg) lbs.
  • How much horsepower does the 2018 ISUZU Npr Xd have?
     - The 2018 ISUZU Npr Xd has 150 horsepower.
  • How much does the 2018 ISUZU Npr Xd weigh?
     - The 2018 ISUZU Npr Xd is listed to weigh 6459 - 12051 lbs.
NHTSA Mandated Recalls
  • Recall 195557 [USA]: The misalignment may cause the propeller shaft to separate, causing a loss of power to the rear wheels and a stall, increasing the risk of a crash.

  • Recall 155335 [USA]: Unexpected loss of steering increases the risk of a crash.

  • Recall 144157 [USA]: The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.

  • Recall 139501 [USA]: If the brake switch and nylon retainer are not properly secured, the switch can detach from the bracket causing the brake lights to illuminate whether or not brake pedal is depressed, the shift interlock will not operate and the accelerator pedal input will be disabled resulting in the inability to accelerate. these conditions can increase the risk of a crash.

  • Recall 134220 [USA]: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

  • Recall 2018183 [Canada]: Brakes

  • Recall 2021168 [Canada]: Suspension

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

EPA Test Results
  • General Motors: Chevrolet 3500HD Isuzu Commercial Truck of America: NPR, STRIPPED CHASSIS (WALK IN VAN) - Test: JSZXD03.03FA

    Description Data
    Displacement (L)2.998
    Curb Weight (lbs.)12051
    Gross Vehicle Weight Rating (lbs.)14000
    Equivalent Test Weight (lbs.)13000
    Test Drive Description2-Wheel Drive, Rear
    Transmission Type DescriptionAutomatic
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • WB23-X-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to an
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • IB22-N-001 - EXTERIOR LIGHTING:TURN SIGNAL: We have received reports of the front turn signal lenses cracking on isuzu vehicles. These lenses are cracking from the effects of being washed with alkaline detergents. Alkaline detergents are typically used in industrial settings an
  • WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • IB09-X-004C - ENGINE AND ENGINE COOLING: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
  • IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
  • IB10X004L - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM): In an effort for continuous improvement, isuzu has a need to obtain mimamori ecu
  • IB08-X-002 - FUEL SYSTEM, DIESEL: Isuzu diesel engines available in the above affected vehicles meet the california air resource board's (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
  • IB11-L-003C - FUEL SYSTEM, DIESEL:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: This information is being issued to help dealers identify apotenetial source for fuel contamination. If a customer's complaint leads to the discovery of contaminated fuel, the source of the contamination must be found and repaired. Contami
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Axles2
Body Cab TypeMDHD: Tilt
Body ClassIncomplete - Chassis Cab (Single Cab)
Brake System TypeHydraulic
DisplacementCC3000
DisplacementCI183.0712322841
DisplacementL3
Drive Type4x2
Engine ConfigurationIn-Line
Engine Cylinders4
EngineHP150
EngineKW111.8550
Engine ManufacturerIsuzu
Engine ModelIZ3 - 4JJ1-TC
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 3: 10,001 - 14,000 lb (4,536 - 6,350 kg)
MakeISUZU
MakeID542
ManufacturerISUZU MOTORS LIMITED, JAPAN
Manufacturer Id1171
ModelNPR
ModelID14203
Model Year2018
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.)
NCSA MakeIsuzu
NCSA ModelMedium/Heavy – COE, low entry
NoteBumper to Back of Cab length = 71 inches
Other Engine InfoINTERCOOLER
Plant CityFUJISAWA
Plant Company NameIsuzu Motors Ltd.
Plant CountryJAPAN
TurboYes
VINJALB4W170J7F00164
Vehicle DescriptorJALB4W17*J7
Vehicle TypeINCOMPLETE VEHICLE
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
JALB4W177J7F002262018NPRFUJISAWA , JAPAN
JALB4W172J7F000842018NPRFUJISAWA , JAPAN
JALB4W179J7F003112018NPRFUJISAWA , JAPAN
JALB4W170J7F001642018NPRFUJISAWA , JAPAN
JALB4W172J7F002772018NPRFUJISAWA , JAPAN
JALB4W179J7F001462018NPRFUJISAWA , JAPAN
JALB4W178J7F001402018NPRFUJISAWA , JAPAN
JALB4W178J7F002522018NPRFUJISAWA , JAPAN
JALB4W171J7F000272018NPRFUJISAWA , JAPAN
JALB4W170J7F002142018NPRFUJISAWA , JAPAN
JALB4W172J7F000982018NPRFUJISAWA , JAPAN
JALB4W178J7F000562018NPRFUJISAWA , JAPAN
JALB4W178J7F003022018NPRFUJISAWA , JAPAN
JALB4W171J7F002372018NPRFUJISAWA , JAPAN
JALB4W176J7F002032018NPRFUJISAWA , JAPAN
JALC4W16XJ7K006732018NPR-XDFUJISAWA , JAPAN
JALC4W165J7K011782018NPR-XDFUJISAWA , JAPAN
JALC4W167J7K003862018NPR-XDFUJISAWA , JAPAN
JALC4W16XJ7K008212018NPR-XDFUJISAWA , JAPAN
JALC4W161J7K015482018NPR-XDFUJISAWA , JAPAN
JALC4W169J7K009242018NPR-XDFUJISAWA , JAPAN
JALC4W167J7K015542018NPR-XDFUJISAWA , JAPAN
JALC4W166J7K000692018NPR-XDFUJISAWA , JAPAN
JALC4W168J7K005572018NPR-XDFUJISAWA , JAPAN

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.