2017 ISUZU ReachIsuzu Reach 2017

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2017 ISUZU Reach, manufacturered by Isuzu Motors Limited, Japan.
The vehicle is described as a 4x2 Single-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.).

ManufacturerKnown WMI(s)Fuel Type
ISUZUJAL Diesel
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2017 ISUZU Reach produced?
     - The 2017 ISUZU Reach is produced in Fujisawa Tokyo, Japan.
  • Are there recalls for the 2017 ISUZU Reach?
     - There are 2 recall(s) for the 2017 ISUZU Reach, additional information is below.
  • What is the GVWR of a 2017 ISUZU Reach?
     - The 2017 ISUZU Reach has a GVWR of Class 3: 10,001 - 14,000 lb (4,536 - 6,350 kg) lbs.
  • How much horsepower does the 2017 ISUZU Reach have?
     - The 2017 ISUZU Reach has 150 horsepower.
NHTSA Mandated Recalls

  • Recall 195545 [USA]: The misalignment may cause the propeller shaft to separate, causing a loss of power to the rear wheels and a stall, increasing the risk of a crash.

  • Recall 141077 [USA]: If the front driveshaft detaches from the vehicle, drive power will be lost, increasing the risk of a crash. the detached driveshaft may also create a road hazard, increasing the risk of a crash for following traffic.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • WB23-X-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to an
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • IB09-X-004C - EQUIPMENT ADAPTIVE/MOBILITY: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
  • IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
  • IB10X004L - EQUIPMENT: In an effort for continuous improvement, isuzu has a need to obtain mimamori ecu
  • IB08-X-002 - FUEL SYSTEM, DIESEL: Isuzu diesel engines available in the above affected vehicles meet the california air resource board's (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
  • XLF-SFT01-12 - POWER TRAIN: Technical service bulletin informing only customer of xl hybrid isuzu reach vehicles that the front drive shaft of vehicles should be regularly lubricated every 10,000 miles.
  • WB12-X-001D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: The reach van is assembled from a chassis supplied by isuzu commercial truck of america, inc., which is responsible for warrantying the engine and chassis, and a body supplied by utilimaster corporation, which is responsible for warrantying
NHTSA decoded information from VIN

140 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Axles2
Body ClassIncomplete - Stripped Chassis
Brake System TypeHydraulic
DisplacementCC3000
DisplacementCI183.0712322841
DisplacementL3
Drive Type4x2
Engine ConfigurationIn-Line
Engine Cylinders4
EngineHP150
EngineKW111.8550
Engine ManufacturerIsuzu
Engine ModelIZ3 - 4JJ1-TC
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 3: 10,001 - 14,000 lb (4,536 - 6,350 kg)
MakeISUZU
MakeID542
ManufacturerISUZU MOTORS LIMITED, JAPAN
Manufacturer Id1171
ModelREACH
ModelID30819
Model Year2017
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.)
NCSA MakeIsuzu
NCSA ModelMedium/Heavy – COE, low entry
NoteCab Type: Stripped Chassis (WIV)
Other Engine InfoINTERCOOLER
Plant CityFUJISAWA
Plant Company NameIsuzu Motors Ltd.
Plant CountryJAPAN
SeriesWalk-in Van built up by Utilimaster
TurboYes
VINJALB4T170H7W00089
Vehicle DescriptorJALB4T17*H7
Vehicle TypeINCOMPLETE VEHICLE
More information on VIN Requirements can be found at Title 49
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
JALB4T170H7W000892017REACHFUJISAWA , JAPAN
JALB4T178H7W005492017REACHFUJISAWA , JAPAN
JALB4T178H7W005522017REACHFUJISAWA , JAPAN
JALB4T178H7W005352017REACHFUJISAWA , JAPAN
JALB4T170H7W004952017REACHFUJISAWA , JAPAN
JALB4T174H7W009842017REACHFUJISAWA , JAPAN
JALB4T173H7W004602017REACHFUJISAWA , JAPAN
JALB4T170H7W009962017REACHFUJISAWA , JAPAN
JALB4T172H7W001432017REACHFUJISAWA , JAPAN
JALB4T175H7W000072017REACHFUJISAWA , JAPAN
JALB4T177H7W003812017REACHFUJISAWA , JAPAN
JALB4T171H7W008142017REACHFUJISAWA , JAPAN
JALB4T174H7W008382017REACHFUJISAWA , JAPAN
JALB4T178H7W000342017REACHFUJISAWA , JAPAN
JALB4T172H7W008062017REACHFUJISAWA , JAPAN
JALB4T170H7W003972017REACHFUJISAWA , JAPAN
JALB4T171H7W000982017REACHFUJISAWA , JAPAN
JALB4T179H7W007852017REACHFUJISAWA , JAPAN
JALB4T179H7W002842017REACHFUJISAWA , JAPAN
JALB4T174H7W003232017REACHFUJISAWA , JAPAN
JALB4T179H7W000742017REACHFUJISAWA , JAPAN
JALB4T175H7W005392017REACHFUJISAWA , JAPAN
JALB4T175H7W008162017REACHFUJISAWA , JAPAN
JALB4T179H7W005922017REACHFUJISAWA , JAPAN

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.