Kenworth T370 2010

• Recall 146216 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.
  Paccar incorporated (paccar) is recalling certain 2008-2019 peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 kenworth t170, t270, t370, t660, t680, t800, t880, and w900 vehicles equipped with namux software. In the event that the anti-lock brake system (abs) loses battery and/or ignition power to the controller, the dash warning light for the abs may not illuminate to warn the driver of the loss of abs. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 121, "air brake systems," and 136, "electronic stability control system on heavy vehicles."
  paccar will notify owners, and dealers will update the namux software within the cab control module, free of charge. Paccar issued owners an interim notification on june 4, 2020. The recall began may 26, 2020. Owners may contact kenworth customer service at 1-425-828-5888 or peterbilt customer service at 1-940-591-4220. Paccar's number for this recall is 20pbc and 20kwb.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

• Recall 69412 [USA]: An over-torque of the spindle nut may cause the bearing to seize, possibly resulting in the overheating of the wheel end. as a result, a wheel end fire may occur.
  Kenworth is recalling certain model year 2010 t270 and t370 trucks equipped with non-lms hubs. The spindle nut attaching the hub and bearing to the axle spindle (steer or drive) may have been over-torqued during the hub installation process.
  dealers will replace the bearings free of charge. The spindle and hub will be inspected for scoring and replaced if necessary. The safety recall began on april 23, 2010. Owners may contact kenworth at 425-828-5440.
  paccar recall no. 10kwa.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

• Recall 67887 [USA]: This condition will permit hot exhaust gases to exit the vehicle tailpipe, increasing the risk of melting or burning of nearby surfaces, or a fire.
  Paccar is recalling model year 2008-2010 kenworth t300, t270, and t370, model year 2009-2010 t800 and peterbilt model year 2008-2010 335, 340, and 367 vehicles built on cummins' diesel engine. The vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. Due to an issue with the logic in the ecm software in these engines, the switch may not function correctly, leading the operator to believe that the switch is in "inhibit" mode when it is not.
  paccar is working with cummins to repair the engines free of charge please see 09e-046. The safety recall began on october 1, 2009. Owners may contact cummins at 1-800-diesels (1-800-343-7357).
  kenworth recall no. 09kw9 & peterbilt recall no. 909-d.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

• Recall 2020148 [Canada]: Lights and instruments
  Issue: on certain trucks, the warning light for the tractor anti-lock brake system (abs) may not turn on if the system loses power. If this happens, the driver will not get warning that the abs is not working properly. Note: this problem would also cause the traction control (tc) and electronic stability control (esc) lights not to turn on. Safety risk: if a driver is not warned that the abs is not working properly, there could be an increased risk of a crash. Corrective actions: paccar will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (cecu).

• Recall 2009256 [Canada]: Emissions
  The emergency vehicle applications that are subject of this recall are designed with a dash-mounted switch that enables the vehicle operator to inhibit the aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. Due to an issue with the logic in the electronic control module (ecm) software in certain vehicles, the switch may not function correctly, leading the operator to believe that the switch is in "inhibit" mode when, in fact, it is not. As a consequence, the operator may unknowingly permit hot exhaust gases to exit the vehicle tailpipe, increase the risk of melting or burning of nearby surfaces, or a fire, causing property damage, personal injury or death. Correction: cummins dealers will upgrade the ecm software.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.