Lexus Sc430 2002

• Recall 144239 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Toyota motor engineering & manufacturing (toyota) is recalling certain 2010-2016 4runner, 2003-2006 tundra, 2003-2013 corolla, 2009-2010 corolla matrix, 2004-2005 rav4, 2002-2007 sequoia, 2011-2013 sienna, 2008-2012 scion xb, 2008-2009 lexus is-f, 2007-2012 yaris and lexus es350, 2010-2017 lexus gx460, 2002-2010 lexus sc430, 2006-2012 lexus is250 and is350 and 2010-2015 lexus is250c and is350c vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began november 20, 2019. Owners may contact toyota customer service at 1-888-270-9371 or lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are j0a, j0b, and j0c. Lexus' numbers for this recall are jli, jlj, and jlk.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2019523 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: vehicles may have had the original front passenger airbag inflator replaced as a "like-for-like" replacement under recall 2016-103 (toyota recall #'s src 241 & src 242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.

  Show Content

• Recall 2018699 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the passenger frontal airbag inflator or airbag assembly. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under recall 2013-133 (toyota recall #'s ssc 193/241 & ssc 194/242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.

  Show Content

• Recall 2016103 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: all vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.

  Show Content

• Recall 2015269 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

There is condensation in the head lamps which affects how well they work at night. The car has not been modified or had any type of injury that would result in condensation being inside the headlight covers. This is a safety issue that needs to be addressed. It impairs how well the headlamps work.

2002 lexus sc430. Consumer writes in regards to front passenger airbag inflator module safety recall. *ld the consumer stated the vehicole was taken to have the recall completed, but was told the zone was not currently authorized to complee the repair. Updated 11/08/2017*js

Had airbag recall done about 1500 miles ago, air bag warning light is now on , steady ,all the time

I had the safety recall, concerning the airbag inflator module, done on my car but now the airbag sensor light stays on.

Takata recall bought this vehicle about a year ago and have not received any notice on what to do to get this fixed.

Driving the car under normal conditions at about 45 mph and the brakes went completely out without any warning. Im fortunate that i didn't crash the vehicle into something or someone! Contacted lexus to let them know the issue and they basically laughed it off !! Poor customer service!! *tr

Tl* the contact owns a 2002 lexus sc430. The contact received a notification for recall nhtsa campaign number: 14v312000 (air bags). However, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the issue. The contact had not experienced a failure.

Tl* the contact owns a 2002 lexus sc430. The contact received a recall notification for nhtsa campaign number: 14v312000 (air bags); however, the part needed to repair the vehicle was unavailable. The manufacturer was not notified. The contact had not experienced a failure.

Tl* the contact owns a 2002 lexus sc430. The contact received a notification for recall nhtsa campaign number: 14v312000 (air bags). However, the parts needed to perform the repairs were not available. The contact believed that the manufacturer had exceeded the reasonable amount of time for repair. The dealer stated that the part was not available. The manufacturer was not made aware of the delay. The vehicle was not repaired. The contact had not experienced the failure.