Mci D4000istv 2018

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2018 MCI D4000istv.

ManufacturerKnown WMI(s)Fuel Type
MCI
MCI VIN Decoder

Use the box here to look up VINs from MCI as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2018 MCI D4000istv?
     - There are 2 recall(s) for the 2018 MCI D4000istv, additional information is below.
NHTSA Mandated Recalls
  • Recall 212897 [USA]: Mdp circuit board failure can result in a fire or an unexpected vehicle shutdown, increasing the risk of a crash.

  • Recall 206520 [USA]: A fuel leak in the presence of an ignition source increases the risk of a fire.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • TSIB 22-03 - SEATS: Technical service information bulletin describing the replacement of seating backrest attachment hardware with the addition of a mechanical lock nut on specifically equipped buses manufactured prior to model year 2020.
  • ITS60421 - EQUIPMENT: This technical instruction is a description of the inspections and cleaning procedures being recommended by mci due to the parts shortages which are impacting the repair inspections associated with nhtsa recall 21v-748. These are the same i
  • ITS60421 - EQUIPMENT: This instruction to service (its) is a description of the inspections being recommedned by mci due to the parts shortages which are impacting the repair instructions associated with nhtsa recall 21v-748. These are the same instructions as o
  • TSIB 22-01 - EQUIPMENT: This is an upgrade to technical service information bulletin tsib 21-10 issued in january of 2022 which is specific to buses operating in severe duty and or corrosive environments. These bulletins have been issued to recommend interim inspe
  • TSIB 21-10 - EQUIPMENT: This technical service information bulletin describes interim inspection procedures required every 6000 miles on specific motor coaches due to the global parts shortage and subsequent delay in available parts to conduct the corrective actio
  • TSIB 21-01 - SERVICE BRAKES, HYDRAULIC: This technical service information bulletin (tsib) describes an update from meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with meritor ex225 disc
  • P03-263 - EQUIPMENT ADAPTIVE/MOBILITY: This procedure outlines the steps to replace the aluminum rivets with stainless steel nuts and bolts to secure the rad panel due to galvanic corrosion.
  • P08-54 - ENGINE AND ENGINE COOLING: This procedure outlines the steps to install a relief valve on the air compressor for coaches equipped with dd13 engines.
  • SB 3120 - ELECTRICAL SYSTEM: This service bulletin informs owners of the procedure to clean the batteries and reapply corrosion inhibitor every 6000 miles or 3 months, whichever first occurs.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.