Mci D4005 2013

Vehicle Details: Recalls, Investigations, Service Bulletins

Below you will find all available information on the 2013 MCI D4005.

ManufacturerKnown WMI(s)Fuel Type
MCI
MCI VIN Decoder

Use the box here to look up VINs from MCI as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2013 MCI D4005?
     - There are 6 recall(s) for the 2013 MCI D4005, additional information is below.
NHTSA Mandated Recalls
  • Recall 250933 [USA]: Beacons that do not provide proper illumination may be less visible to wheelchair lift users, increasing the risk of injury.

  • Recall 132051 [USA]: If the pipe develops a hole, during a regeneration cycle, hot exhaust gases may leak out, increasing the risk of a fire.

  • Recall 111291 [USA]: If the seatbelt anchorage assembly separates from the j-bracket, the bus driver may not be properly restrained in the event of a crash increasing their risk of injury.

  • Recall 96524 [USA]: During a regeneration process to clean exhaust emissions, if the bellows pipe has failed, the hot exhaust gases may not be contained, resulting in a fire.

  • Recall 2018256 [Canada]: Emissions

  • Recall 2013121 [Canada]: Engine

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-04 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for april 2024 for motor coach industries.
  • TSIB 22-03 - SEATS: Technical service information bulletin describing the replacement of seating backrest attachment hardware with the addition of a mechanical lock nut on specifically equipped buses manufactured prior to model year 2020.
  • TSIB 21-01 - SERVICE BRAKES, HYDRAULIC: This technical service information bulletin (tsib) describes an update from meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with meritor ex225 disc
  • SB 3139 - EQUIPMENT: This service bulletin provides a checklist of actions to perform on a daily, weekly and monthly basis for parked coaches before they are considered ready for driving.
  • P08-54 - ENGINE AND ENGINE COOLING: This procedure outlines the steps to install a relief valve on the air compressor for coaches equipped with dd13 engines.
  • SB 3120 - ELECTRICAL SYSTEM: This service bulletin informs owners of the procedure to clean the batteries and reapply corrosion inhibitor every 6000 miles or 3 months, whichever first occurs.
  • SB 424B - EQUIPMENT ADAPTIVE/MOBILITY: This service bulletin supersedes service bulletin 424 in its entirety and informs customers that mci was notified by cummins inc. That it has issued a campaign to addresses the isx lubricating oil filter bypass valve in addition to the prev
  • SB 424 - FUEL SYSTEM, GASOLINE: This service bulletin informs customers that mci was notified by cummins inc. That it has released campaign C1638 that addresses the isx lubricating oil filter bypass valve in addition to the previous fuel pump repair actions outlined in mc
  • SB 419 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: This service bulletin informs affected customers that mci was notified by cummins inc. That it has issued a campaign to address isx high pressure fuel pump ceramic plunger fractures as well as the potential of damage to the roller/tappet as
  • SB 410 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: This service bulletin informs affected customers that the diesel exhaust fluid (def) pressure line may exhibit signs of fatigue and melting on model year 2011-2013 mci d model coaches, and that mci will remedy the affected coaches at no cos
  • SB 392B - POWER TRAIN:AUTOMATIC TRANSMISSION: This service bulletin supersedes service bulletin 392 in its entirety and informs affected customers that coaches equipped with a cummins 2010 engine can experience intermittent faults of the engine and/or transmission of the mulitplex cont
  • SB 396 - ENGINE (PWS): This service bulletin informs customers that mci was notified by cummins inc. That it has released campaign C1344 that addresses a calibration change, which cummins advises will improve the engine and aftertreatment reliability on cummins i
  • SB-407 - SUSPENSION:FRONT:SHOCK ABSORBER: Motor coach industries (mci): red 185 durometer polyurethane bushings were replaced with 288 polyurethane bushings in shock absorbers that in cold temperatures, will fail, causing absorber stud to break, at bushing, and coach is not opera
  • SB-3079 - SERVICE BRAKES, AIR:DISC: Motor coach inc: procedure outlines operational checks, on some coaches, concerning park brake automatic actuation operation and secondary and primary brake system, with or without trailer connections. Models d4000, 4005, 4505, 4500. No
Known Recall Investigations
  • Exhaust bellows pipe fracture recall investigation # RQ17007

    By letter dated april 15, 2013, motor coach industries (mci) notified the office of defects investigation (odi) of a safety defect that may exist in certain model year (my) 2012 and 2013 mci d-model coaches built from december 22, 2011 to may 19, 2012 equipped with the cummins 2010 epa isx 12 liter engine.These vehicles may have had an incorrect installation of the exhaust pipe.If installed incorrectly, the elbow pipe may prematurely fail and if a diesel particulate filter regeneration event occurs, the hot exhaust gases could cause a fire, resulting in injury to persons and/or damage to property.Mci conducted an inspect and repair if necessary recall campaign identified by nhtsa recall no: 13v-142. At the time mci believed that 13v-142 covered all the vehicles potentially having the safety defect. However, odi review of ewr data indicated that other vehicles outside the scope of 13v-142 also experienced the same defect condition. Subsequently, in may 2017, mci expanded the scope of the previous recall to include certain my 2011-2012 mci d-model coaches manufactured from january 31, 2011 to may 19, 2012, identified by nhtsa recall no: 17v-337.In april 2013 when mci conducted recall 13v-142 to remedy incorrectly installed bellows pipes on certain mci model year 2012 and 2013 d model vehicles they also changed the bellows pipe assembly process in then current production.With recall 17v-337 mci expanded the first recall by an additional 178 vehicles they felt also had not had the bellows pipe properly installed.Following the receipt of complaints and ewr data alleging bellows pipe failures on vehicles built after the implementation of the improved assembly process, nhtsa opened this recall query to assess the scope and adequacy of these two safety recalls and mcis recall decision making process.Analysis of the failure data provided by mci to this investigation found that the improved assembly process reduced the failure rate but did not eliminate the defect all together.In response to this investigation, mci agreed to conduct recall 18v-309. This latest recall includes and expands upon the vehicle population of the prior recalls, and implements a new remedy that adds a mesh component to the bellows assembly to reduce vibration.This remedy was also implemented in production in 2015.Vehicles built after this date do not have an elevated failure rate even with a significant amount of time in service.With recall action 18v-309 taken by mci this investigation is closed. Further use of agency resources does not appear to be warranted. The closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist on other model or my vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.