Mcneilus Meridian Front Loader 78 2016

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2016 MCNEILUS Meridian Front Loader 78.

ManufacturerKnown WMI(s)Fuel Type
MCNEILUS
MCNEILUS VIN Decoder

Use the box here to look up VINs from MCNEILUS as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2016 MCNEILUS Meridian Front Loader 78?
     - There are 2 recall(s) for the 2016 MCNEILUS Meridian Front Loader 78, additional information is below.
NHTSA Mandated Recalls
  • Recall 143180 [USA]: If the prd does not activate in the event of a buildup of pressure, the cng tank may explode, increasing the risk of fire and injury.

  • Recall 132375 [USA]: The forcible ejection of the stem may increase the risk of injury to those nearby. additionally, the unintended release of cng can increase the risk of a fire.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • MISC-TSIB-081 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-081 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-079 - EQUIPMENT: Mcneilus truck and manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
  • MISC-TSIB-075-A - EQUIPMENT:MECHANICAL: The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
  • FEL-WI-018-A - STRUCTURE: Mcneilus truck and manufacturing offers these instructions for repairing the lugs on the front loader meridian and front loader atlantic cng tailgates.
  • FEL-WI-017-A - STRUCTURE: Mcneilus truck and manufacturing offers these instructions for repairing the lugs on the front loader meridian tailgate.
  • FEL-TSIB-058-A - PARKING BRAKE: Currently, trucks with work brakes do not cut out the throttle advance when the work brake is released. The driver must wait for the function to complete and throttle to drop below 900 rpms, allowing the transmission to go into gear, or t
  • MISC-TSIB-078 - EQUIPMENT: Mcneilus truck and manufacturing offers these instructions for ejector cylinder bypass testing.
  • FEL-TSIB-058 - POWER TRAIN: Currently, trucks with work brakes do not cut out the throttle advance when the work brake is released. The driver must wait for the function to complete and throttle to drop below 900 rpms, allowing the transmission to go into gear, or the
  • FEL-TSIB-059 - EQUIPMENT: To accurately diagnose the problem for meridian vehicles with arms that are not performing as designed. This bulletin will be used to inspect the hydraulic and electrical components to fix any potential issues that the vehicle may be expe
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for mcneilus truck & manufacturing, inc.
  • FEL-TSIB-057 - EQUIPMENT: On the meridian front loader, during performance issues such as slow functions, packing light loads, inability to lift heavy cans, it is recommended to inspect the o-rings on the sequencing valves. The sequencing valve o-rings may be experi
  • TSIB-056 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS: These instructions are for installing tailgate lock cylinders on the meridian (78) and atlantic series (29) front end loaders. Replacing the tailgate lock cylinders may help reduce issues of the tailgate not locking and not unlocking. The
  • FEL-TSB-032 - Me - FUEL SYSTEM, GASOLINE: Mcneilus truck and manufacturing requires the meridian front loader hydraulic pump cv drive shaft be replaced because the shafts may be too short and are suspect to disengaging. The hydraulic pump cv drive shaft can break or twist. A hydra
  • MISC-TSIB-073 - FUEL SYSTEM, GASOLINE: This technical service information bulletin lists instructions to replace the hydraulic vane pumps on mcneilus front and rear loading refuse collection trucks with a longer life hydraulic pump. The hydraulic pump powers vehicle body functio
  • FEL-TSIB-050 - M - STRUCTURE: This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operation
  • FEL-TSB-033 - Me - STEERING:HYDRAULIC POWER ASSIST:PUMP: The content in this document was previously submitted embedded in the original version of fel-tsb-032 meridian hydraulic pump cv drive shaft replacement 0217.Pdf. This cover prevents damage to surrounding components in the event of a hydrau
  • FEL-TSB-032-A - - STEERING:HYDRAULIC POWER ASSIST:PUMP: This document was previously submitted and has been updated. Cv shafts that provide power to the body hydraulic system may be too short. A too short condition can cause damage to the hydraulic pump shaft which may stop hydraulic flow to ref
  • FEL-TSB-031-A - EQUIPMENT: The bolts on the ejector pillow blocks of certain meridian front loaders may not have been torqued properly. This bulletin provides instruction to replace and properly torque the bolts for the ejector pillow block. The ejector is the comp
  • FEL-TSB-032 - POWER TRAIN:AUTOMATIC TRANSMISSION: Some hydraulic pump cv drive shafts may be too short and can break, twist, or disengage on one end. A hydraulic pump drive shaft failure affects refuse body functions, but does not affect chassis driving functions. The bulletin provides an

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.