Mcneilus Pacific Front Loader 2014

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 111665 [USA]: Hydraulic fluid contacting hot exhaust and turbo components increases the risk of a fire.
    Mcneilus truck & manufacturing, inc. (mcneilus) is recalling certain model year 2012-2015 atlantic, pacific, contender, and ultra front loader refuse trucks manufactured march 2, 2012, to october 14, 2015 and equipped with an optional hydraulic test port tube to check hydraulic system pressures and taking hydraulic fluid samples. This tube may crack or break and allow hydraulic fluid to contact hot exhaust and turbo components.
    mcneilus will notify owners, and dealers will remove the optional hydraulic test port tube, and cap off the hydraulic test inlet port, free of charge. The recall began on december 16, 2015. Owners may contact mcneilus customer service at 1-888-686-7278. Mcneilus' number for this recall is vsr-tsb-014.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  • Recall 110817 [USA]: In the event of a fire, if the fire extinguisher does not work correctly, there is an increased risk of injury.
    Mcneilus truck & manufacturing, inc., (mcnelius) is recalling certain model year 2013-2015 mcneilus bridge master mixer, standard mixer, sliding trailer mixer, standard rear loader, rear loader w/3.5 yd hd tail, zero radius automated, auto reach, atlantic front loader, split body rear loader, rear loader w/tag axle, metro pak rear loader, xxc rear loader, and pacific front loader vehicles manufactured august 1, 2013, to may 14, 2015. These concrete mixers and refuse trucks are equipped with certain kidde plastic valve disposable handheld fire extinguishers that may not properly discharge when the lever is pressed.
    mcneilus will notify owners, and advise them to follow the provided instructions from kidde to inspect their fire extinguishers. Kidde will replace the fire extinguishers as necessary, free of charge. The recall began on october 19, 2015. Owners may contact mcneilus customer service at 1-888-686-7278. Mcneilus' number for this recall is kidde: cpsc 15-079.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • MISC-TSIB-081 - FUEL SYSTEM, GASOLINE: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-081 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-079 - EQUIPMENT: Mcneilus truck and manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
  • MISC-TSIB-075-A - EQUIPMENT:MECHANICAL: The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
  • FEL-TSIB-061 - STRUCTURE: This repair procedure describes how to reinforce the rear inner radius of the arm, the arm base, and the top arm fork lug on all pacific (model 85), pacific ultra (model 76), and contender (model 87) front end loaders. Perform this repair
  • MISC-TSIB-078 - EQUIPMENT: Mcneilus truck and manufacturing offers these instructions for ejector cylinder bypass testing.
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for mcneilus truck & manufacturing, inc.
  • FEL-TSIB-051 - P - STRUCTURE: This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operation

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.