Mcneilus Zr 2015

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2015 MCNEILUS Zr.

ManufacturerKnown WMI(s)Fuel Type
MCNEILUS
MCNEILUS VIN Decoder

Use the box here to look up VINs from MCNEILUS as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2015 MCNEILUS Zr?
     - There are 3 recall(s) for the 2015 MCNEILUS Zr, additional information is below.
NHTSA Mandated Recalls
  • Recall 110800 [USA]: In the event of a fire, if the fire extinguisher does not work correctly, there is an increased risk of injury.

  • Recall 107296 [USA]: If the latch arm unexpectedly extends from the side of the vehicle, there is an increased the risk of a crash.

  • Recall 2015400 [Canada]: Accessories

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • ZR-TSIB-015 - ENGINE AND ENGINE COOLING: Mcneilus truck and manufacturing offers these instructions for the installation of a hydraulic reservoir breather upgrade kit to reduce oil leakage in in-body hydraulic reservoirs and frame mounted hydraulic reservoirs on zero radius (zr)
  • MISC-TSIB-081 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • WM-TSIB-022 - FUEL SYSTEM, GASOLINE: Mcneilus truck and manufacturing offers these instructions for the installation (retrofit installation) of a streetside panel/door on the tailgate in an effort to reduce trash buildup behind the cng cover. This is for zero radius trucks w
  • MISC-TSIB-079 - EQUIPMENT: Mcneilus truck and manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
  • ZR-TSIB-014 - EQUIPMENT: Mcneilus truck and manufacturing offers these instructions for the installation of an alternative divider from a different supplier (due to supply chain shortages). This new flow divider will function the same as the old valve.
  • MISC-TSIB-078 - EQUIPMENT: Mcneilus truck and manufacturing offers these instructions for ejector cylinder bypass testing.
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for mcneilus truck & manufacturing, inc.
  • ZR-TSIB-012-A - ENGINE AND ENGINE COOLING: This bulletin, previously released in december 2017, has been updated to provide a consolidated parts list. This bulletin instructs how to remove the zero radius? (zr) grabber carriage motor bolts and replace with studs if the motor bolts
  • MISC-TSIB-072 - - STRUCTURE: This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operation
  • WM-TSB-039-D - I - PARKING BRAKE:DRIVELINE:HYDRAULIC:HOSES, LINES/PIPING, AND FITTINGS: This bulletin was initially intended for a single customer. The bulletin has now been released for a second customer requesting the update. The update consists of removing the bonded hydraulic hoses (hoses that are attached to each other in
  • RS-TSB-011 - Zer - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin consists of removing the bonded hydraulic hoses (hoses that are attached to each other into a hose assembly) and replacing with individual hydraulic hoses (non-bonded) with a fabric wrap installed. The hydraulic hose assembly
  • ZR-TSIB-011 - EQUIPMENT ADAPTIVE/MOBILITY: This is an informational bulletin advising customers that when the zr grabber carriage rollers become worn and need replacing there is a new part number available. The new parts provide an improved way to lubricate the rollers that should i

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.