2004 Mercedes-Benz CLK55Mercedes-benz Clk55 2004

Complaint Information: Consumer Complaints, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI27.50-P-071658 - POWER TRAIN: Harsh engagement when changing gear range from p to d or r
  • LI05.10-P-058758 - ENGINE AND ENGINE COOLING: Noise: a rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: fault code entries in engine control unit: sim271de20: P001177 the position of the intake camshaft (cylinder bank
  • LI35.30-P-058566 - POWER TRAIN: Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). Heard once when changing from forward to reverse (and vice versa)
  • GI88.40-P-057430 - EQUIPMENT: Message in instrument cluster "distronic pluscurrently unavailable - see owner's manual"
  • C1A140101 - EQUIPMENT:ELECTRICAL: This customer 1 action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the verizon
  • LI91.25-P-059380 - SEATS: Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
  • LI91.10-P-049799 - ELECTRICAL SYSTEM: The presence of a quiescent current can have several causes. These are not always recognized and lead to an increased number of ok components being removed. Possible hall sensor faults or normalization faults can exist which can be elimin
  • LI91.10-P-048497 - STRUCTURE: Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. I
  • LI05 20-P-067123 - ENGINE (PWS): Oil in engine wiring harness
  • LI91 45-P-066075 - SEAT BELTS: Seat belt extender toothed rack sluggish or makes noises
  • LI27.60-P-059296 - POWER TRAIN: Selector lever blocks in position "p" (brake applied)
  • LI82.70-P-060004 - EQUIPMENT:ELECTRICAL: Iphone mobile phone: various complaints after software update to ios8
  • LI-58-40 - ENGINE AND ENGINE COOLING:ENGINE: Xentry (mercedes): engine warning lamp is currently on or was on and a delay fault of the camshaft adjust to current or stored in the engine control unit. Models 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, and 403. No model years li
  • PB-91-60-53A - ELECTRICAL SYSTEM: Mercedes vehicle: the srs indicator lamp is illuminated and code B1058 and b2dbo are stored, replace the srs control unit. Models 203 and model 209. Model years unknown. *pe
  • PB-82-10-376F - EXTERIOR LIGHTING:HEADLIGHTS: Mercedes vehicles: the xenon or bi-xenon headlamp not functioning. A function description can be found in wis document gf8s.10-p-20010 (203), gf82.10-p-0003q (209); gf82.10-p-3002r (230). Model years uknown. *pe
  • 2008010001 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: Mercedes-benz - check catalytic converters and replace if necessary - models 203, 209, 211, 215, 230 - model years 2004-2005. *nj update 8/7/2008. *pe
  • 462046 - STEERING:RACK AND PINION: Play in the rack and pinion steering system. Models 203, 209, 210, 211, 215, 220, 230. Mercedes benz. *kb updated 5/13/09. *pe
  • 470036 - FUEL SYSTEM, OTHER: Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. This may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in

OBD-II Error Codes

Common OBD Error codes specific to this vehicle.

  • P0011 [1] "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
  • B1058 [1] B1058
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoFireN NoneNone20110831

The driver's heated seat overheated and melted my shirt tag. The leather ripped and the foam under the leather has deformed. If i hadn't have turned it off it surely would've caught on fire. It was unbearably hot. This occurred with only 23000 miles on the car. *tr

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.