Mercedes-benz S-class 2016

• Recall R/2017/124 [UK]: Faulty control unit may cause vehicle to perform outside specification
  Where a control unit coding was updated in a workshop between 3 december 2016 and 5 december 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle. The safety and emissions systems may not react as design intent.
  recall the vehicles that are likely to be affected and update the software in the corresponding control units.

  Show Content

• Recall R/2016/235 [UK]: Automatic transmission may malfunction
  It has been identified on certain 6 cylinder diesel engine/9 speed automatic transmission vehicles the starter/alternator/transmission wiring harness may be too close to the exhaust system. If it is then there is a risk that the wiring harness may suffer heat damage which can result in the transmission inadvertently selecting neutral whilst driving the auto p function or the manual p function in the transmission not being available. The manually operated parking brake will still function.
  recall all affected vehicles to check and if required reroute or replace the wiring harness. The type of action is dependant on the amount of damage present.

  Show Content

• Recall R/2016/270 [UK]: Extended seat belt may malfunction and reduce effectiveness of shoulder belt
  It has been identified that the rear seatbelt extender may not retract as intended due to an issue with the individual friction conditions experienced by the belt extender which have not be programmed into the control unit. Should the pretensioners deploy during a collision then there is the potential that the extender may fail and break leaving broken edges which can cause a risk of a serious injury or higher occupant loading.
  recall all affected vehicles and recode the rear control unit on the vehicle.

  Show Content

• Recall R/2017/147 [UK]: Left front seat belt pre-tensioner may not meet specification
  The propellant mix in certain seatbelt pre-tensioners ignitors may be incorrect. If the front seatbelt pre-tensioners are deployed the lock function of the pre-tensioners cannot be guaranteed.
  recall the vehicles that are likely to be affected and replace the front seatbelts that are likely to be affected.

  Show Content

• Recall R/2017/214 [UK]: Oil leak from turbocharger feed pipe.
  Under certain conditions the oil feed pipe to the turbocharger may leak.Oil may contact hot components and there is a risk of fire.
  on affected vehicles replace the oil feed line to the turbocharger.

  Show Content

• Recall R/2020/243 [UK]: Engine control unit software to be updated
  Improve the vehicle emissions via software updates.
  update the relevant control unit?S software and if necessary replace the nox sensors.

  Show Content

• Recall R/2019/256 [UK]: To achieve an improvement in the emissions via software updates
  Improve the vehicle emissions via software updates.
  update the diesel engine control unit software and add a supplementary booklet for the operator's manual

  Show Content

• Recall R/2018/266 [UK]: To improve emissions of the affected vehicles.certain calibrations of functionalities must be changed in the engine management
  Improve the vehicle emissions via software updates.
  update the diesel engine control unit software and add a supplementary booklet for the operator's manual

  Show Content

• Recall R/2021/274 [UK]: Vehicles with a panoramic sunroof the polycarbonate panel may not have been bonded correctly during a prior service repair
  The polycarbonate panel located between the windshield and the panoramic sunroof may not have been bonded correctly during a prior service repair.
  remove the bonded panel and install a new polycarbonate panel if required.

  Show Content

• Recall R/2017/253 [UK]: Right front seat belt pre-tensioner may not meet specification
  The right front seat belt pretensioner may not conform to specification . This may adversely affect it's operation in the event of an accident.
  replace the pretensioner on affected vehicles.

  Show Content

• Recall R/2018/010 [UK]: Front seat belt tensioners may not function
  The front seatbelt pre-tensioner ignitors may not perform as expected. This could increase the risk of injury to the seat occupants. The lock function of the seatbelts is not impaired.
  on affected vehicles replace seatbelts with quality assured units.

  Show Content

• Recall R/2019/108 [UK]: A reset in the cpc control unit could occur whilst driving
  The eco start-stop function may be disabled and cause the vehicle to stall.
  the affected vehicles are to be recalled and the software updated.

  Show Content

• Recall R/2020/240 [UK]: The seat belt warning function does not meet the specification
  The seat belt warning function does not meet the specification
  activate the correct seat belt warning scenario in the instrument cluster

  Show Content

• Recall R/2021/082 [UK]: The communication module may be deactivated
  The communication module may be deactivated
  carry out a check of the configuration of the communication module on affected vehicles and if necessary activate the communication module.

  Show Content

• Recall R/2021/106 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/133 [UK]: The emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/134 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/133 [UK]: The emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/134 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall 2018724 [Canada]: Steering
  On certain vehicles originally sold or currently registered in areas of heavy road salt usage during winter months (quebec, new brunswick, nova scotia, prince edward island, and newfoundland & labrador), the bolts that attach the electric power steering assist motor to the steering gear housing may corrode and break. This could cause a loss of power steering assist. The resulting increase in steering effort could create the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the mounting bolts and apply a corrosion protection coating to the gear housing and bolts. If the bolts bolt cannot be removed, a replacement steering gear will be installed.

  Show Content

• Recall 2016564 [Canada]: Seats and restraints
  Certain vehicles may fail to comply with the requirements of canada motor vehicle safety standard (cmvss) 208 - occupant protection in frontal impacts. The driver and front passenger seat belt extenders may not retract as intended, which could cause the vehicle to fail to comply with the requirements of the standard and increase the risk of injury and/or damage to property in a crash. Correction: dealers will update the software for the rear control module to correct the issue.

  Show Content

• Recall 2016511 [Canada]: Lights and instruments
  Certain vehicles may not comply with the requirements of canada motor vehicle safety standard (cmvss) 108 - lighting system and retroreflective devices. The base light in the low-beam headlamps may not have been adjusted according to specification, which may deviate from the tolerance range required by the standard. This could reduce vehicle visibility, which could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will check the setting of the headlamps and correct them as necessary.

  Show Content

• Recall 2015464 [Canada]: Engine
  On certain amg s63 models, the engine may stall due to faulty software in the engine control unit (ecu). Irregular rpm at idle could lead to unintentional engine shut-down prior to a vehicle stop. If this occurs, the driver may falsely interpret the unintentional engine shut down as part of the eco start/stop system, which could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will update the ecu software.

  Show Content

• Recall 2016564 [Canada]: Seats and restraints
  Certain vehicles may fail to comply with the requirements of canada motor vehicle safety standard (cmvss) 208 - occupant protection in frontal impacts. The driver and front passenger seat belt extenders may not retract as intended, which could cause the vehicle to fail to comply with the requirements of the standard and increase the risk of injury and/or damage to property in a crash. Correction: dealers will update the software for the rear control module to correct the issue.

  Show Content

• Recall 2016511 [Canada]: Lights and instruments
  Certain vehicles may not comply with the requirements of canada motor vehicle safety standard (cmvss) 108 - lighting system and retroreflective devices. The base light in the low-beam headlamps may not have been adjusted according to specification, which may deviate from the tolerance range required by the standard. This could reduce vehicle visibility, which could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will check the setting of the headlamps and correct them as necessary.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.