Peterbilt 384 2017
Vehicle Details: Recalls, Investigations, Service Bulletins
Use the box here to look up VINs from PETERBILT as well as other manufacturers
-
Where is the 2017 PETERBILT 384 produced?
- The 2017 PETERBILT 384 is produced in Denton Tx, United States (usa).
-
Are there recalls for the 2017 PETERBILT 384?
- There are 3 recall(s) for the 2017 PETERBILT 384, additional information is below.
Recall 146528 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.
Recall 2020148 [Canada]: Lights and instruments
Recall 2018389 [Canada]: Brakes
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- E279 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: An engine software defect exists in certain vehicles equipped with emy17 mx-13 and mx-11 engines that pertains to timer action and count calibrations for a time-based diagnostic. This diagnostic action checks fuel pressure and has no negati
- 45-064 - ENGINE AND ENGINE COOLING: Info only - paccar is introducing over-the-air (ota) software updates for engine my17 and newer chassis equipped with cummins x15, x12, isx12, isx12n, l9n, px-7, and px-9 engines the technology will leverage the existing remote diagnostic c
- 13-060 - BRAKES (PWS): The service information for bendix air dryer maintenance is being updated to include new procedures.
- 51-013 - EQUIPMENT: Due to major data carriers phasing out 3g networks, chassis currently utilizing first generation peoplenet mobile gateway (pmg001) will experience severe 3g service degradation as early as january of 2022. Chassis currently utilizing 3g ant
- 43-071 - FUEL SYSTEM, DIESEL: Fix-as-fail a?? Due to undersupply issues, only a limited supply of diesel exhaust fluid (def) sensors are available. As a temporary solution, after paccar confirms a def sensor is not available, a temporary software update will allow a veh
- FRN11151CustLtr - WHEELS: Sample customer letter - field repair 11151: steering column mounting bolts loose.
- FRN216-1Custltr - STEERING: Sample customer letter - 216-1 dana intermediate steering shaft unseated or missing c-clip.
- 02-160 - VISIBILITY: Information only ⿿ windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
- 02-158 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Fix as fail: peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that co
- 13-054 - BRAKES (PWS): Fix-as-fail - bendix new-gen lightweight steer axle drum brake spider cracking
- 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
- 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (a??Soca??) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
- 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
- 18PBB - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT: Safety recall bulletin: updated with permanent repair path for phase 1 vehicles. The tractor abs lamp may not illuminate when abs controller loses battery and/or ignition power. Nhtsa recall number is 18v368. Non compliance to fmvss and
- 20 PBC - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT: Safety recall interim bulletin: the tractor abs lamp may not illuminate when abs controller loses battery and/or ignition power. Nhtsa recall number is 20v199 non compliance to fmvss and cmvss 121 and 136. Resolution is to reflash softwa
- 43-066 - STRUCTURE: Def tank covers may become loose and potentially crack on vehicles built before october 2019 with def tank part number m86-6221-003**(tank-def medium assy) and m86-6222-003**(tank-def large, assy). Resolution is to resolve the vibration on
- 34-085 - ELECTRICAL SYSTEM: Information only ⿿ vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
- 16-041 - SUSPENSION: Non safety campaign: peterbilt has determined that certain model 365, 384, 386, 388, 389, 3895, 587 and 579 vehicles built between march 27, 2012 and january 20, 2019 with flex air suspension in a 6x2 configuration have u-bolts that may fa
Quarter fender failures investigation # PE20015
The office of defects investigation (odi) is opening this preliminary evaluation (pe) on model year (my) 2017 - 2019 peterbilt and kenworth vehicles equipped with quarter fenders. Odi has received reports with allegations of quarter fender failures resulting in road debris or collateral damage to the subject vehicle. Peterbilt and kenworth vehicles are highly customizable, with several options for fenders.Quarter fenders are approximately two feet by two feet square and can be made of either plastic or metal.N some events the plastic fenders have fractured leaving only the mounting tube. The separated pieces of plastic or metal fenders pose a safety risk to both the subject vehicle and other motorists and pedestrians who may be struck by the separated fender.Odi is aware of one (1) consumer complaint alleging multiple separations. One such separation reportedly damaged the air brake system. Odi is aware of additional fleet reports of quarter fender failures.During complainant interviews, odi learned that the alleged defect in the plastic fenders may be limited to a specific production period. Fleet interviews indicated that only factory equipment fenders fractured, and replacements performed better.A preliminary evaluation has been opened to determine the frequency and severity of this failure mechanism and understand the conditions that might influence this failure on the subject vehicles.The odi report cited above can be reviewed at: http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid using complaint identification number 11349017.