Pierce Custom Chassis 1999

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 1999 PIERCE Custom Chassis.

ManufacturerKnown WMI(s)Fuel Type
PIERCE
PIERCE VIN Decoder

Use the box here to look up VINs from PIERCE as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 1999 PIERCE Custom Chassis?
     - There are 2 recall(s) for the 1999 PIERCE Custom Chassis, additional information is below.
NHTSA Mandated Recalls
  • Recall 35177 [USA]: Failure of the tie-rod will allow one of the wheels to swing to the limit of its steering stop, potentially causing a loss of vehicle control, increasing the risk of a crash.

  • Recall 2005310 [Canada]: Steering

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • PB_663 - ENGINE AND ENGINE COOLING: As a product improvement, pierce will be changing coolant probes from a contact probe to a capacitive sensor.
  • PB_637.2 - ELECTRICAL SYSTEM: Fault code 241 for the vehicle speed sensor can potentially lead to customer complaints that the vehicle's speedometer can max out or read incorrectly.
  • WB_653 - STEERING: Improper installation of the vent lines that connect the wheel ends and carrier can cause the seals to blow out and leak oil. This document is to alert our dealers to check the t3 rear axles in their coverage area and to provide how to corr
  • PB_633 - SUSPENSION: This bulletin will provide instruction to measure current torque rod specifications to ensure that the correct hendricksona? Traax roda? Torque rods and shims (if applicable) are ordered for replacement, if desired to change to. These torqu
  • SB_624 - STRUCTURE: Proper repair of frame rail corrosion.
  • PB_567 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: To improve customer experiences by eliminating most needs for an engineering review, this service bulletin clarifies the upgrade procedure from pma300 to pma500 governors. Two options are given. The first option applies only to vehicles tha
  • SB_446.1 - ELECTRICAL SYSTEM: The gen 1 husky 3 foam pump from fsc is being discontinued. To keep supporting our customers, a conversion kit is available to install the gen 2 husky 3 foam pump in place of the gen 1.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.