Pierce Dash 2008

Vehicle Details: Recalls, Investigations

Below you will find all available information on the 2008 PIERCE Dash.

ManufacturerKnown WMI(s)Fuel Type
PIERCE
PIERCE VIN Decoder

Use the box here to look up VINs from PIERCE as well as other manufacturers

#

Sub-models: - Dash Cf -

Frequently Asked Questions
  • Are there recalls for the 2008 PIERCE Dash?
     - There are 14 recall(s) for the 2008 PIERCE Dash, additional information is below.
NHTSA Mandated Recalls
  • Recall 138661 [USA]: If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.

  • Recall 121562 [USA]: Axle shafts that are not properly heat treated may break and potentially disable the vehicle, increasing the risk of a crash.

  • Recall 99583 [USA]: If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.

  • Recall 77087 [USA]: If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash.

  • Recall 68207 [USA]: Detachment of the steering gear will result in a loss of steering control that could cause a crash.

  • Recall 80746 [USA]: If this interference occurs, braking performance may be reduced without warning and a crash may occur.

  • Recall 86305 [USA]: If this occurs the fire hose may drop to the roadway without warning. potential injury to people and property may occur. the sudden hose deployment may also distract drivers trying to avoid the hose and a crash may occur.

  • Recall 86031 [USA]: Unexpected emergency vehicle engine shutdown under certain conditions could hamper rescue operations and place the public at risk.

  • Recall 67802 [USA]: Inadvertent deployment of the side-roll protection system could result in a vehicle crash or injury to an out of position occupant.

  • Recall 84993 [USA]: If the adjuster can not rotate, brake performance may be compromised and a crash may occur.

  • Recall 2020240 [Canada]: Structure

  • Recall 2011173 [Canada]: Engine

  • Recall 2010319 [Canada]: Steering

  • Recall 2013167 [Canada]: Other

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Known Recall Investigations
  • Williams controls accelerator pedals investigation # EQ11003

    On april 26, 2011, pierce manufacturing, inc. (pierce) notified the nhtsa that it had decided certain pierce fire trucks, manufactured between june 22, 1999, and may 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 arrow xt, dash, lance, and enforcer vehicles contain a williams controls, inc. (williams controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11v-255.On may 12, 2011, rmd mailed an information request (ir) letter to williams controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams controls responded to rmds ir letter on june 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to nhtsas office of the chief counsel under a request for confidentiality.Williams controls response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to williams controls, pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, williams controls stated that it has, "never had a warranty claim or other notice, other than by pierce on their modified pedal, due to lever arm permanent deformation for item number 131507."while williams controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by pierce.This equipment query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, rmd will continue to monitor recall activity to see if any similar issues are found in other manufacturers vehicles.This eq is closed.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.