SI-B63-02-10
Service Bulletin Details
Public Details for: SI-B63-02-10
Bmw: check control message displayed; turn signals flash fast. Intermittently or permanently, a bulb out check control message is displayed, together with the turn signal flashing fast. *pe updated on 11/8/2013. *kb
- 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 -
Models from 2012
2012 BMW 7-SERIES |
Models from 2011
2011 BMW 7-SERIES |
Models from 2010
2010 BMW 7-SERIES |
Models from 2009
2009 BMW 7-SERIES |
Models from 2008
2008 BMW 7 SERIES |
Models from 2007
2007 BMW 7 SERIES |
Models from 2006
2006 BMW 7 SERIES |
Models from 2005
2005 BMW 7 SERIES |
SB-10034574-6534 SB-10034574-6534 Page 1 of 2 SB-10034574-9636 SI B63 02 10 Lights September 2013 Technical Service This Service Information bulletin supersedes SI B63 02 10 dated July 2010. designates changes to this revision SUBJECT Check Control Message Displayed; Turn Signals Flash Fast MODEL . E65 E66 Produced from 3/2005 SITUATION Intermittently or permanently, a “Bulb out” Check Control message is displayed, together with the turn signal flashing fast. Fault code A8B0 or A8B1 (direction indicator, front left or right) is stored in the LM_AHL_2 (Lamp Module) control module. The inoperative turn signal may be the auxiliary turn signal in the fender. CAUSE Shorted wire in the headlamp CORRECTION Please see the attachment for the repair procedure. WARRANTY INFORMATION Covered under the terms of the BMW New Vehicle/SAV Limited Warranty. Defect Code: 63 13 00 79 00 Labor Operation: Labor Allowance: Description: 00 00 006 Refer to KSD2 Performing “vehicle test” (with vehicle diagnosis system – checking faults) Refer to KSD2 Charging battery Refer to KSD2 Removing and reinstalling headlamp (left) and if necessary, also 61 21 528 and 63 12 520 or Removing and reinstalling headlamp https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15681.4.B630210... 10/4/2013 Page 2 of 2 63 12 522 Refer to KSD2 (right) 2 FRU Work time to reinsulate and reposition wire on one side and 63 99 000 Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead. Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the “Search” button, and then enter the applicable flat rate labor operation in the FR code field. Even though work time labor operation code 63 99 000 ends in “000,” it is not considered a Main labor operation. ATTACHMENTS View PDF attachment B630210_Attachment. [ Copyright ©2013 BMW of North America, Inc. ] https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15681.4.B630210... 10/4/2013