TSB-14-005

CSC-10054878-6744
January 2014
Technical Service Bulletin Notification TSB #14-005
FIRST LAST_NAME
ADDRESS
CITY, STATE ZIP
COUNTRY
Dear Valued Jayco RV Dealer:
Jayco has determined certain Model Year 2014 Eagle Model CY Travel Trailers require an
inspection to confirm if the power cord is laying free in the furnace area or is located in a box
behind the furnace. If inspection finds that the power cord box is missing, one will be installed
in the unit and the power cord placed in the box.
Our records indicate that the following Eagle CY Travel Trailer is currently stock at your
dealership: “serial number”
The coverage period for this Technical Service Bulletin is for one (1) year from the release
of this notification. If you have sold this effected vehicle, please contact the current owner
regarding this Service Bulletin and process the Warranty Registration for this customer. If you
have questions regarding this Service Bulletin, please contact Jayco Customer Service at 800283-8267.
We apologize for any inconvenience this may cause. However, we are confident that this
improvement will offer continued satisfaction with your customer’s Jayco Travel Trailer.
Sincerely,
Jayco

SB-10054878-1530
TECHNICAL SERVICE BULLETIN
TSB#: 14-005
Job Code: 9801162
Flat Rate:
Inspection ONLY:
Inspection and repair:
0.15 hour
0.75 hour
NOTE: This Technical Service Bulletin will be valid within (1) year from the original date of publication.
REQUIRES PARTS TO BE ORDERED FROM Jayco for every unit.
ACTION REQUIRED:
Inspect for power cord box. If missing, install box.
NOTE: Applies only to 30 AMP units.
MODELS / UNITS:
2014 Eagle Travel Trailer
E1CY 0053, 0055-0057, 0059-0060, 0062, 0065-0068, 0070, 0077, 0080-0081, 0083-0084
324BHTS
Note: Kit can only be ordered using the order form
included with this bulletin.
KIT CONTENTS
(1)
(1)
Power cord box
Instruction sheet
TOOLS/MATERIAL REQ.:
Screw gun w/square head bit
INSTRUCTIONS
Inspect to see it power cord box exists
1.
The power cord box should be located in the rear of the unit, behind the furnace. Locate the furnace grill, and remove the bottom
drawer to the left of the grill. If there is a power cord box, it will be visable in right corner below the bottom drawer.
Power cord box
If there is a power cord box, no other action is required. If box is missing, proceed to Step 2.
Installing the power cord box
2.
Remove the exterior furnace vent. To remove the vent, remove the screws, set aside for re-use. Gently pry the vent loose from the wall.
Pull the vent out of the wall and set aside.
3.
Remove the interior furnace grill by removing the screws on both sides of the grill. Set the screws and grill aside for re-use.
Jayco TSB 14‐005‐Power Cord Box
January 28, 2014
1 of 2
4.
Loosen and remove the (4) heat hoses from the furnace.
5.
Remove the bottom and side screw from the furnace. Slide the furnace out of the cabinet.
6.
Insert the power cord box into the cabinet base. Using 1-1/2" screws, fasten the cleat on the top of the box to the bottom of the
wardrobe shelf. Fasten the cleat on the bottom of the box to the rear wall.
NOTE: recommend minimum of 4 screws per cleat.
NOTE: It may be necessary to move the metal junction box to the (left) side before installing the power cord box.
Fasten top cleat to
wardrobe shelf
Metal junction box may
need to be moved
Fasten bottom cleat
4.
Slide the furnace back into the wardrobe base. Re-install the side and bottom screw(s). Hook up the (4) furnace hoses.
Inspect all furnace connections and wiring in the compartment to make sure they are not pinched or constricted. Re-install the grill.
5.
Re-install the exterior furnace vent.
Jayco TSB 14‐005‐Power Cord Box
Inspect the sealant on the vent and repair any voids or damage to the sealant.
January 28, 2014
2 of 2