SB-TS-M76

Service Bulletin Details

Public Details for: SB-TS-M76

Temsa: procedure information explaining the installation of vent hose on bus. Model ts-30. *pe


- 2014 - 2013 - 2012 -

Models from 2014
2014 TEMSA TS30
Models from 2013
2013 TEMSA TS30
Models from 2012
2012 TEMSA TS30
SERVICE BULLETIN
SB-10056651-1786
Bulletin Type...…:
M
Bulletin No…..…:
TS-M76
Bulletin Name..…:
Ventilation Hose TS30
SUBJECT : Vent Hose Installation
SUMMARY : This bulletin explains the vent hose
installation.
NHTSA #...........:
Bulletin Ref.No…:
700002378
Release Date……:
15.07.2014
Bulletin Responsible………….:Hakan GÖRGÜN
Expiry Date……..:
15.07.2015
Published by & Approved by... :Süleyman Uğurses
Vehicle Model….:
TS30
Flat Rate Code….:
TS-M76
Flat Rate Time….:
30 min
Welding on the Chassis
• Always disconnect the batteries (starting with the negative lead).
• Disconnect the connectors of electrical and electronic equipment (electronic control units, sensors and actuators) if they are less
than 20 inches away from the chassis part to be welded or the earth terminal of the welding equipment.
• The earth terminal should never be attached to vehicle components such as engine, axles and springs. Arcing on these
parts is not permitted, because of the risk of damage to bearings, springs, etc.
• The earth terminal must make good contact and be placed as close as possible to the part to be welded.
• Plastic pipes, rubber parts and parabolic springs should be well protected against welding spatter and temperatures
higher than 70°.
• The contact switch must not be in the accessory or contact position. The contact key should be removed.
• Reconnect in reversed order of disconnecting. Ensure that a good earth connection is made between chassis, engine
and cab.
TS-M76
1/8
SERVICE BULLETIN
Service bulletin expiry dates differ according to service
bulletin type.
Definitions
U-Type : Application period of this bulletin is 12
months after the date of issue.U type bulletin is used
for updates that need to be performed upon
customer complaints.
Release Date: As of this date the bulletin is released
and available on E-Doc. Modification parts can be
ordered. The time period between the release date
and the effective date may vary according to the
procurement lead time.
Effective Date: As of this date specified amount of the
total modification parts will be available on Spare
Parts Stock. Modification parts can be ordered and the
application can be performed. ( except noncompliance and safety related campaigns, i.e. S-Type
Bulletin)
• C-Type: Application period of this bulletin is 12
months after the date of issue. C type bulletin is
generally used for supplying technical instructions or
other type of information to service network.
Part Order Deadline: Last order date for modification
parts. The part orders which will be placed after this
date should be approved by Regional Coordinator.
Expiry Date: Expiration date for the application.
• M-Type: Application period of this bulletin is 12
Bulletin Types
months after the date of issue. M type bulletin is used
for updates that should be implemented without
waiting for customer complaints.
• S- Type: Application period of this bulletin is
18 months after the date of issue. S type bulletin is
used for Recall Campaigns.
TS-M76
2/8
SERVICE BULLETIN
Parts List
INSTALLED PARTS LIST
1
2
3
4
5
PART NO
NK213125
BKSG1-3220C
TC386109Y
TC398915Y
BW302504009D
PART NAME
MANG. SIL200 Ø25X3000
CLIPS, RSGU 1. 32/20 W1
BOLT M6x1x20
BAND CABLE
CLAMP, BAND, T25-40,9mm
Qty.
59”
2
2
4
2
UNIT OF MEASURE
Inch
Piece
Piece
Piece
Piece
Technical Instructions
1. Open the fuel tank door to have
the access the ventilation valves
2. The hose will be connected to the
ventilation valve outlet on the tank.
3. The hose, NK213125 will be used
for this application. It will be
directed as shown.
TS-M76
3/8
SERVICE BULLETIN
4. Note that , the hose should be
routed always on the top level as
much as possible.
5. Mount the to the ventilation valve
outlet on the tank by using clamp
(BW302504009D).
TS-M76
4/8
SERVICE BULLETIN
6. Hole cutting operation must be
performed with the diameter 1,38”.
7. Hose should be clamped to the
chassis wall as shown in the pictures.
TS-M76
5/8
SERVICE BULLETIN
Flat Rate Break Down
APPLICATION
Preparation
Vent Hose Installation
TOTAL
TIME
5 min
25 min
30 min.
TS-M76
6/8
SERVICE BULLETIN
Affected Vehicle List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
NLTAPLR56C1000001
NLTAPLR58C1000002
NLTAPLR5XD1000004
NLTAPLR55D1000007
NLTAPLR51D1000005
NLTAPLR53D1000006
NLTAPLR57D1000008
NLTAPLR59D1000009
NLTAPLR55D1000010
NLTAPLR57D1000011
NLTAPLR59D1000012
NLTAPLR50D1000013
NLTAPLR52D1000014
NLTAPLR54D1000015
NLTAPLR56D1000016
NLTAPLR58D1000017
NLTAPLR5XD1000018
NLTAPLR51D1000019
NLTAPLR58D1000020
NLTAPLR5XD1000021
NLTAPLR51D1000022
NLTAPLR53D1000023
NLTAPLR55D1000024
NLTAPLR57D1000025
NLTAPLR59D1000026
NLTAPLR50D1000027
NLTAPLR52D1000028
NLTAPLR54D1000029
NLTAPLR50D1000030
NLTAPLR52D1000031
NLTAPLR54D1000032
NLTAPLR56D1000033
NLTAPLR58D1000034
NLTAPLR5XD1000035
NLTAPLR53D1000037
NLTAPLR55D1000038
NLTAPLR51D1000036
NLTAPLR57D1000039
NLTAPLR53D1000040
NLTAPLR55D1000041
NLTAPLR57D1000042
NLTAPLR59D1000043
NLTAPLR50D1000044
NLTAPLR52D1000045
NLTAPLR54D1000046
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
NLTAPLR56D1000047
NLTAPLR58D1000048
NLTAPLR5XD1000049
NLTAPLR56D1000050
NLTAPLR58D1000051
NLTAPLR5XD1000052
NLTAPLR51D1000053
NLTAPLR53D1000054
NLTAPLR55D1000055
NLTAPLR57D1000056
NLTAPLU53E1000001
NLTAPLR59D1000057
NLTAPLR50D1000058
NLTAPLR52D1000059
NLTAPLR59D1000060
NLTAPLR50D1000061
NLTAPLR52D1000062
NLTAPLR54D1000063
NLTAPLR56D1000064
NLTAPLR58D1000065
NLTAPLR5XD1000066
NLTAPLR51D1000067
NLTAPLR53D1000068
NLTAPLR55D1000069
NLTAPLR51D1000070
NLTAPLR53D1000071
NLTAPLR55D1000072
NLTAPLR57D1000073
NLTAPLR59D1000074
NLTAPLR50D1000075
NLTAPLR52D1000076
NLTAPLR54D1000077
NLTAPLR56D1000078
NLTAPLR58D1000079
NLTAPLR54D1000080
NLTAPLU55E1000002
NLTAPLU57E1000003
NLTAPLU59E1000004
NLTAPLU50E1000005
NLTAPLU54E1000007
NLTAPLU56E1000008
NLTAPLU58E1000009
NLTAPLU54E1000010
NLTAPLU56E1000011
NLTAPLU58E1000012
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
TS-M76
7/8
SERVICE BULLETIN
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
NLTAPLU5XE1000013
NLTAPLU51E1000014
NLTAPLU53E1000015
NLTAPLU55E1000016
NLTAPLU59E1000097
NLTAPLU50E1000098
NLTAPLU52E1000099
NLTAPLU55E1000100
NLTAPLU57E1000101
NLTAPLU59E1000102
NLTAPLU50E1000103
NLTAPLU52E1000104
NLTAPLU54E1000105
NLTAPLU56E1000106
NLTAPLU58E1000107
NLTAPLU51E1000109
NLTAPLU58E1000110
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
NLTAPLU5XE1000108
NLTAPLU5XE1000111
NLTAPLU51E1000112
NLTAPLU53E1000113
NLTAPLU57E1000115
NLTAPLU55E1000114
NLTAPLU52E1000006
NLTAPLU59E1000116
NLTAPLU50E1000117
NLTAPLU52E1000118
NLTAPLU54E1000119
NLTAPLU50E1000120
NLTAPLU52E1000121
NLTAPLU54E1000122
NLTAPLU56E1000123
NLTAPLU58E1000124
NLTAPLU5XE1000125
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
TS-M76
8/8


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.