Temsa Ts30 2012
Vehicle Details: Recalls, Service Bulletins
Use the box here to look up VINs from TEMSA as well as other manufacturers
-
Where is the 2012 TEMSA Ts30 produced?
- The 2012 TEMSA Ts30 is produced in ADANA Adana, Turkey.
-
Are there recalls for the 2012 TEMSA Ts30?
- There are 6 recall(s) for the 2012 TEMSA Ts30, additional information is below.
Recall 103964 [USA]: In the event of an emergency, passengers may spend extra time trying to get the roof exit open, increasing the risk of injury.
Recall 104740 [USA]: The driver's reduced ability to easily see traffic approching from the right side increases the risk of a crash.
Recall 97212 [USA]: Without a label to identify the closest release mechanism, in the case of an emergency, passengers may spend extra time to find the location of an exit window release mechanism, increasing the risk of injury.
Recall 97552 [USA]: In the event of a crash, the bolts may break, failing to properly anchor the seat, increasing the risk of injury.
Recall 96653 [USA]: Without accurate gauges, the driver may not notice the pressure change in the secondary brake system. the driver may also not be aware of an abs issue without the bulb illuminating each time the key is turned on. either issue increases the risk of a crash.
Recall 93787 [USA]: After repeated use of the "body lift" function, the brake hoses may leak air reducing the braking force of the front brake system, increasing the risk of a crash.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
- TS-C115 - SUSPENSION: This bulletin defines alignment specifications of the ts35 vehicle. Alignment of ts 30.
- TC-C113 - SUSPENSION: This bulletin defines alignment specifications of the ts30 vehicle. Alignment specifications of ts 35.
- No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
- TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
- TS35E - EQUIPMENT: The lift
- TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
- TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
- Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
- TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
- TS-U111 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-U107 - FUEL SYSTEM, GASOLINE: New flap is to be installed in fuel tank filler cap
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick
- RAS SYSTEM BLEED - STEERING: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
- TS-C113 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Alignment sepcifications of ts30. This bulletin defines alignment specifications of the ts30 vehicle.
- TS-C109 - POWER TRAIN: Relocating transmission oil dipstick. For ease of access to oil dipstick of the transmission, filling rod has been rerouted.
- Information Docu - POWER TRAIN:AUTOMATIC TRANSMISSION: Information document sheet.
- TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
- RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
- TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
- Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
- 9020-230Y - ELECTRICAL SYSTEM: Ts 35 epa13 wiring. Refer to section 6 and section for hardware pin-out of moki, zr32, multiplexers, and can lines. As the multiplex unites are controlled by special algorithm, in case needed, the latest vehicle program should be downloade
- SB-TS-M76 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: Temsa: procedure information explaining the installation of vent hose on bus. Model ts-30. *pe
- SB-TS-U-42 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR: Temsa: information provided for certain buses regarding the improvement, and prevention, of the alternator bracket (tensioner arm) failure. Models ts30. No model years. *pe
- TS-U33 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR: Temsa bus: the alternator bracket needs to be changed. Model ts-30. No model year listed. *pe