44852

Service Bulletin Details

Public Details for: 44852

Ford: 2011-2015 ford fiesta and 2012-2014 ford focus vehicles equipped with a dps6 transmission when using solvents to clean the dps6 transmission bell housing and clutch, should avoid input shaft seal exposure to solvent. *ta


- 2015 - 2014 - 2013 - 2012 - 2011 -

Models from 2015
2015 FORD FIESTA
Models from 2014
2014 FORD FIESTA
2014 FORD FOCUS
Models from 2013
2013 FORD FIESTA
2013 FORD FOCUS
Models from 2012
2012 FORD FIESTA
2012 FORD FOCUS
Models from 2011
2011 FORD FIESTA 
SB-10057815-3182
44852
2011-2015 Fiesta/2012-2014 Focus- DPS6 Transmission ... Do Not Expose Input Shaft
Seals To Solvents
On 2011-2015 Fiesta/2012-2014 Focus vehicles equipped with a DPS6 transmission
when using solvents to clean the DPS6 transmission bell housing and clutch. Be
careful to avoid input shaft seal exposure to solvent. If any solvent contacts the
input shaft seal, wipe the area dry immediately. After cleaning the clutch assembly,
allow ample time for the assembly to dry before installation. The seal could
have swelled and if not completely dry when installed, may result in damage to
the seal.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.