T-TT-0280-14

Service Bulletin Details

Public Details for: T-TT-0280-14

Summary to be provided on a future date.


- 2014 -

@TOYOTA
Tech Tip
T-TT-0280-14
Janua ry 05, 20 14
APPLICABLE VEHICLES
2014
2014
2014
2014
2014
2014
2014
Camry
Prius
Avalon HV
Prius V
Avalon
Prius C
Camry HV
2014
2014
2014
2014
2014
2014
Highlander
Sienna
RAV4 EV
4Runner
Prius PHV
Highlander HV
CONDITION
During Pre-Delivery Service (PDS), it is standard procedure (as outlined in the PDS check sheets) to
verify that the Safety Connect system is in "Shelled Mode" with a green LED illuminated prior to
delivering the vehicle . Occasionally settings in the Data Communication Module (in-vehicle DCM) , or
on the network may prevent the "Shelled Mode" status. In these potential cases, the vehicle is likely
to be in "Shipping Mode" and a red LED may be detected with or without a OTC.
NOTE : "Shipping Mode" is quick to identify as both red and green LEDs blink together for 20
seconds. If "Shipping Mode" is identified , please continue with the following recommendations .
RECOMMENDATIONS
In the event that a green LED does not remain illuminated after the ignition is turned on and after the
LED system check, first attempt a DCM Activation using the Techstream "Telematics" utility as
outlined in the Repair Manual.
NOTE: The Repair Manual indicates that a red LED remaining on without a OTC requires a
DCM replacement repair. A repair might not be necessary if the system only needs to be
activated.
Please review the flow chart on page 2 of this Tech Tip and the Repair Manual procedures to identify
modes and the activation process. If the DCM Activation utility does not result in successful activation ,
contact the TAS hotline prior to replacing the DCM .
Expires on
Ver. 2.3 01/01/2014 T
01 /05/20 15
© 2014 , Toyota Motor Sales, USA
Page 1 of 3
Tech Tip
@TOYOTA
Janua ry 05, 2014
T-TT-0280-14
Subject
Market
Safety Connect Initialization During PDS
USA
Appllcab1!1ty
RECOMMENDATIONS
Engine switch on (IG)
I
1:
I Red Indi cator on fo r 2 seco nd s
I
I
+
Red Indicator off
I
I
I
Shi pp ing Mode
Gree n Ind icat or on fo r 2 seco nds
I
I
Red and Green blin k simult aneo usly
(1 seco nd int e1val, for 20 second s)*1
'1
Active Mode I Shell Mode
Stat us
Red OFF
Gree n: OFF
Fail (A OTC is
set)
II
I
Except
ca lling
I
Oeactive Mode I Service Mode
Fail (A OTC
is set)
Pass (No OTC)
Ca llin g
Pass (No OTC)
I
Red OFF
Red : ON
Gree n: Blin ks
Gree n: Blin ks
Red OFF
Red : ON
I Gree n: ONI
Green : OFF
Red: OFF
Gree n: OFF
!
~
I Red ON .I
I
I
ree n: OFF
Pass (No OTC)
~r
,,
.
Engine swit ch off*2
Fail (A OTC
is set)
Red: OFF
Red ON
Gree n OFF
Green: OFF
!
I
Red OFF
Gree n OFF
Expires on
Ver. 2.3 01/01/2014 T
01 /05/201 5
© 201 4, Toyota Motor Sales , USA
Page 2 of 3
@TOYOTA
Tech Tip
January 05 , 2014
T-TT-0280-14
Sub1ect
Market
Safety Connect Initialization During PDS
USA
Appl1cab1hty
LINK REFERENCES
This Tech Tip does not contain any link references
Expires on
Ver. 2.3 01101/20 14 T
01 /05/2015
© 2014 , Toyota Motor Sales , USA
Page 3 of 3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.