S-TT-0067-13

Service Bulletin Details

Public Details for: S-TT-0067-13

Summary to be provided on a future date.


- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -

'APPL.ICABt::.E VEHICLES
xD
2009-2014
2013-2014
2009-2014
2013
2009-2014
2012-2014
Tips for writing a DPR (Dealer Product Report on manufacturing issues for windows and windshields.
'
RECOMMENDATIONS
If you encounter a vehicle that exhibits a manufacturing issue and you're planning to submit a DPR on
the issue; please include a photo that outlines the concern area with white paint marker and a photo of
the Regulation ID which is located in the lower corner of the glass.
NOTE: Do NOT write reports on stone chips or other outside influences that cause glass damage
Before taking a picture.of the Regulation ID, place a blank sheet of paper behind the Regulation ID
(sheet of paper must create a contrast with the text of the Regulation ID) .
- _... ---...
--.........
. Regulation ID
-....... -....... ..........
This Tech Tip does not contain any link references
Expires On
Ver. 2.1 8/28/2011 S
07/31/2014
© 2013, Toyota Motor Sales, USA
Page 1 of 1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.