2019485/3
Service Bulletin Details
Public Details for: 2019485/3
Summary to be provided on a future date.
Models from 2008
2008 AUDI A4 |
2008 AUDI A4 CABRIOLET |
2008 AUDI A6 |
Models from 2007
2007 AUDI A4 |
2007 AUDI A4 CABRIOLET |
2007 AUDI A6 |
Models from 2006
2006 AUDI A4 |
2006 AUDI A4 CABRIOLET |
2006 AUDI A6 |
Models from 2005
2005 AUDI A4 |
2005 AUDI A6 |
Technical Service Bulletin 01 MIL on (DTC P2070, P2006 or P2007 stored in ECM) 01 14 76 2019485/3 April 15, 2014. Supersedes Technical Service Bulletin Group 24 number 10-22 dated June 2, 2010 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A6 2005 - 2008 All 3.2l FSI A4 2005 - 2008 All 3.2l FSI A4 Cabriolet 2007 - 2008 All 3.2l FSI Condition REVISION HISTORY Revision Date Purpose 3 - Revised header data (Updated customer codes; added DTCs) 2 6/12/2010 Revised header data (Controlling TSB display in ElsaWeb) 1 12/3/2008 Original publication • MIL on. • One of the following DTCs is stored in the engine control module (ECM), J623 (address word 01): • DTC P2070 (Intake Manifold Tuning (IMT) Valve Stuck Open). • DTC P2006 (Intake Manifold Runner Control Stuck Closed, Bank 1). • DTC P2007 (Intake Manifold Runner Control Stuck Closed, Bank 2). • There may be slight power reduction at high RPMs. This condition does not cause stalling. Technical Background Vacuum line cracks. Production Solution Updated vacuum line. © 2014 Audi of America, Inc. Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service 1. Use the vacuum pump to identify the vacuum leak in the system. Attach vacuum pump as shown (Figure 1). Figure 1. Vacuum pump, attached. 2. Apply vacuum. 3. Identify the leaking vacuum line by separating and blocking each section. Tip: The vacuum line (06E133633) attached to the vacuum pump (Figure 1) is usually the causal part. 4. If a vacuum leak is identified, replace the appropriate vacuum line. 5. If vacuum stays stable during the test procedure, check corresponding actuator diaphragm: • DTC P2070 may be caused by a leak in the IMT actuator diaphragm. • DTC P2006 and P2007 may be caused by a leak in the manifold runner actuator diaphragm. © 2014 Audi of America, Inc. Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2483 Damage Code: 0015 Labor Operations: Identify leaking vacuum line, replace vacuum line 2483 1999 30 TU Diagnostic Time: GFF 0150 0000 10 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB # 2019485/3 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools NOTE: Replace only the affected vacuum line. Part number Part Description Quantity 06E133633 Vacuum line 1 06E133647A Vacuum line 1 06E133782B Vacuum line 1 06E133778C Vacuum line 1 Tool Number Tool Description VAS 6213 Vacuum pump © 2014 Audi of America, Inc. Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Additional Information All parts and service references provided in this TSB (2019485) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2014 Audi of America, Inc. Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.