TSBENG150

GROUP
ENG
MODEL
2014MY
Rio (UB) w/1.6 GDi
2014MY
Soul (PS) w/1.6 GDi
NUMBER
150
DATE
July 2015
TECHNICAL SERVICE BULLETIN
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326/P0441(SA194)
This bulletin provides information related to the ECM software upgrade of some 2014MY Rio
(UB), produced from October 01, 2013 through January 22, 2014, and some 2014MY Soul (PS)
vehicles, produced from August 26, 2013 through January 24, 2014, which may experience a
malfunction indicator lamp (MIL) illuminated with the Electronic Control Module (ECM) systemrelated DTCs; P0326, P0441. To correct this condition, the ECM should be reprogrammed
using the GDS/KDS download, as described in this bulletin. For confirmation that the latest
reflash has been done to a vehicle you are working on, verify ROM ID using the tables in this
TSB.
P0326: Knock Sensor 1 Circuit Range/ Performance (Bank 1)
P0441: Evaporative Emission System Incorrect Purge Flow
Global Diagnostic System (GDS)
 NOTICE
A Service Action is a repair program without customer notification that is performed
during the warranty period. Any dealer requesting to perform this repair outside the
warranty period will require DPSM approval.
Repair status for a VIN is provided on WebDCS (Service> Warranty Coverage>
Warranty Coverage Inquiry> Campaign Information). Not completed Recall / Service
Action reports are available on WebDCS (Consumer Affairs> Not Completed Recall>
Recall VIN> Select Report), which includes a list of affected vehicles.
This issue number is SA194.
File Under: 
Circulate To:
x General Manager

x Service Advisor(s)

x Service Manager

x Parts Manager

x Technician(s) 
x Body Shop Manager 
x Fleet Repair

Page 2 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
 NOTICE
DO NOT replace any parts related to the DTCs mentioned above unless proven to
be the cause after the DTC reflash has been performed. First perform the reflash
as described in this bulletin, and verify that no DTC(s) will re-set. Should a DTC reset after the reflash, diagnose according to KGIS. Parts replacement in
conjunction with this TSB may be subject to Mandatory Parts Return and returned
parts will be tested by KMA. Unnecessarily replaced parts will be subject to
charge-back.
ECM Upgrade Procedure:
To correct this condition, the ECM should be reprogrammed using the GDS
download, as described in this bulletin.
UPGRADE EVENT NAME
238.UB 1.6GDI KNOCKING IMPROVEMENT
255.PS 1.6GDI KNOCKING IMPROVEMENT
 NOTICE







A fully charged battery is necessary before ECM upgrade can take place. It is
recommended that the Midtronics GR8-1299 system be used in ECM mode during
charging. DO NOT connect any other battery charger to the vehicle during ECM upgrade.
All ECM upgrades must be done with the ignition key in the ‘ON’ position.
Be careful not to disconnect any cables connected to the vehicle or GDS during the ECM
upgrade procedure.
DO NOT start the engine during ECM upgrade.
DO NOT turn the ignition key ‘OFF’ or interrupt the power supply during ECM upgrade.
When the ECM upgrade is completed, turn the ignition ‘OFF’ and wait 10 seconds before
starting the engine.
ONLY use approved ECM upgrade software designated for the correct model, year.
CAUTION
Before attempting an ECM upgrade on any Kia model, make sure to first determine
whether the particular model is equipped with an immobilizer security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to
chargeback.
TSB: ENG 150 / SA194 Rio (UB), Soul (PS) July 2015
Page 3 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
ROM ID INFORMATION TABLES :
Upgrade event #238 (UB)
ROM ID
MODEL
T/M
ISG
IMMO
ECU P/N
PREVIOUS
M/T
No (-)
No (-)
39110 2BDL0
39110 2BDN0
39110 2BDR0
No (-)
Yes (+)
39110 2BDM0
39110 2BDP0
39110 2BDS0
No (-)
No (-)
39110 2BDL5
39110 2BDA7
39110 2BDR5
No (-)
Yes (+)
39110 2BDM5
39110 2BDB7
39110 2BDS5
UB
1.6GDI
A/T
GGUB-BNU6ES00600
GGUB-BNU6ES01600
GGUB-BNU6ES02600
GGUB-BNU6ES03600
GGUB-BNU6ES0060A
GGUB-BNU6ES016A0
GGUB-DNU6ES00600
GGUB-DNU6ES01600
GGUB-DNU6ES02600
GGUB-DNU6ES03600
GGUB-DNU6ES04600
GGUB-DNU6ES05600
GGUB-DNU6ES06600
GGUB-ENU6ES01600
GGUB-BNU6FS00600
GGUB-BNU6FS01600
GGUB-BNU6FS02600
GGUB-BNU6FS03600
GGUB-BNU6FS0060A
GGUB-BNU6FS016A0
GGUB-DNU6FS00600
GGUB-DNU6FS01600
GGUB-DNU6FS02600
GGUB-DNU6FS03600
GGUB-DNU6FS04600
GGUB-DNU6FS05600
GGUB-DNU6FS06600
GGUB-ENU6FS01600
GGUB-BNU6PS00C00
GGUB-BNU6PS01C00
GGUB-BNU6PS02C00
GGUB-BNU6PS03C00
GGUB-BNU6PS04C00
GGUB-BNU6PS00C0A
GGUB-BNU6PS01CA0
GGUB-DNU6PS00C00
GGUB-DNU6PS01C00
GGUB-DNU6PS02C00
GGUB-DNU6PS03C00
GGUB-DNU6PS04C00
GGUB-DNU6PS05C00
GGUB-DNU6PS06C00
GGUB-ENU6PS01C00
GGUB-BNU6QS00C00
GGUB-BNU6QS01C00
GGUB-BNU6QS02C00
GGUB-BNU6QS03C00
GGUB-BNU6QS04C00
GGUB-BNU6QS00C0A
GGUB-BNU6QS01CA0
GGUB-DNU6QS00C00
GGUB-DNU6QS01C00
GGUB-DNU6QS02C00
GGUB-DNU6QS03C00
GGUB-DNU6QS04C00
GGUB-DNU6QS05C00
GGUB-DNU6QS06C00
GGUB-ENU6QS01C00
NEW
GGUB-ENU6EF01600
GGUB-ENU6FF01600
GGUB-ENU6PF01C00
GGUB-ENU6QF01C00
TSB: ENG 150 / SA 194 Rio (UB), Soul (PS) July 2015
Page 4 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
Upgrade event #238 (UB) (cont.)
ROM ID
MODEL
TM
ISG
Yes (+)
UB 1.6
GDI
A/T
Yes (+)
Yes (+)
Yes (+)
IMMO
No (-)
Yes (+)
No (-)
Yes (+)
ECM P/N
PREVIOUS
NEW
39110 2BDL8
39110 2BDC7
39110 2BDR6
GIUB-BNU6PS00C00
GIUB-BNU6PS01C00
GIUB-BNU6PS02C00
GIUB-BNU6PS03C00
GIUB-BNU6PS04C00
GIUB-BNU6PS00C0A
GIUB-BNU6PS01CA0
GIUB-BNU6PS02CA0
GIUB-DNU6PS00C00
GIUB-DNU6PS01C00
GIUB-DNU6PS02C00
GIUB-DNU6PS03C00
GIUB-DNU6PS04C00
GIUB-DNU6PS05C00
GIUB-DNU6PS06C00
GIUB-DNU6PS07C00
GIUB-DNU6PS08C00
GIUB-ENU6PS01C00
GIUB-ENU6PF01C00
39110 2BDM8
39110 2BDD7
39110 2BDS6
GIUB-BNU6QS00C00
GIUB-BNU6QS01C00
GIUB-BNU6QS02C00
GIUB-BNU6QS03C00
GIUB-BNU6QS04C00
GIUB-BNU6QS00C0A
GIUB-BNU6QS01CA0
GIUB-BNU6QS02CA0
GIUB-DNU6QS00C00
GIUB-DNU6QS01C00
GIUB-DNU6QS02C00
GIUB-DNU6QS03C00
GIUB-DNU6QS04C00
GIUB-DNU6QS05C00
GIUB-DNU6QS06C00
GIUB-DNU6QS07C00
GIUB-DNU6QS08C00
GIUB-ENU6QS01C00
GIUB-ENU6QF01C00
39110 2BDE7
GIUB-DNU6PSG0C00
GIUB-DNU6PSG1C00
GIUB-DNU6PSG2C00
GIUB-DNU6PSG3C00
GIUB-DNU6PSG4C00
GIUB-DNU6PSG5C00
GIUB-DNU6PSG6C00
GIUB-DNU6PSG7C00
GIUB-DNU6PSG8C00
GIUB-DNU6PFG9C00
39110 2BDF7
GIUB-DNU6QSG0C00
GIUB-DNU6QSG1C00
GIUB-DNU6QSG2C00
GIUB-DNU6QSG3C00
GIUB-DNU6QSG4C00
GIUB-DNU6QSG5C00
GIUB-DNU6QSG6C00
GIUB-DNU6QSG7C00
GIUB-DNU6QSG8C00
GIUB-DNU6QFG9C00
TSB: ENG 150 / SA194 Rio (UB), Soul (PS) July 2015
Page 5 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
Upgrade event #255 (PS)
ROM ID
MODEL
TM
ISG
IMMO
No (-)
ECU P/NO
PREVIOUS
NEW
39110 2BSG0
GGPS DNU6FS00600
GGPS DNU6FS01600
GGPS DNU6FF01600
39110 2BSH0
GGPS DNU6ES00600
GGPS DNU6ES01600
GGPS DNU6EF01600
39110 2BSG5
GGPS DNU6QS00C00
GGPS DNU6QS01C00
GGPS DNU6QF01C00
39110 2BSH5
GGPS DNU6PS00C00
GGPS DNU6PS01C00
GGPS DNU6PF01C00
Yes (+)
M/T
No (-)
PS
1.6GDI
Yes (+)
No (-)
A/T
No (-)
No (-)
To verify the vehicle is affected, be sure to check the Calibration Identification of the
vehicle's ECM ROM ID and reference the Information Table as necessary.
 NOTICE
If performing this TSB using KDS, refer to TSB SST 037 for detailed information.
1.
Connect the power supply cable to the GDS.
 NOTICE
If attempting to perform the ECM upgrade with the power supply cable
disconnected from the GDS, be sure to check that the GDS is fully charged before
ECM upgrade. If the GDS is not fully charged, failure to perform the ECM upgrade
may occur. Therefore, it is strongly recommended that the power supply connector
be connected to the GDS.
2.
Connect the USB cable between the VCI and the GDS.
 NOTICE
When performing the ECM upgrade using the GDS, wireless communication
between the VCI and GDS is not available. Therefore, be sure to connect the USB
cable between the VCI and the GDS.
TSB: ENG 150 / SA 194 Rio (UB), Soul (PS) July 2015
Page 6 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
3.
Connect the Main 16-pin DLC cable (GHDM – 241000) to the VCI.
4.
Connect the Main 16-pin DLC cable
(GHDM – 241000) to the OBD-II
connector, located under the driver's side
of the instrument panel.
5.
With the ignition key ON, turn ON the VCI and GDS. Access the GDS vehicle identification
number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
6.
Select ENGINE system and click OK.
Display screen above is for demonstration only purposes and will vary depending on model.
7.
Select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then
Engine. Perform the ECM upgrade in accordance with normal GDS ECM upgrade
procedures.
TSB: ENG 150 / SA194 Rio (UB), Soul (PS) July 2015
Page 7 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
CAUTION
Before attempting an ECM upgrade on any Kia model, make sure to first determine
whether the particular model is equipped with an immobilizer security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to
chargeback.
 NOTICE
Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always
follow the instructions given on the GDS in either Auto or Manual mode. See table
for Manual Mode passwords.
* MANUAL MODE ECM UPGRADE PASSWORDS:
* Do NOT perform Manual Mode ECM upgrade unless Auto Mode fails.
Upgrade event #238 Rio (UB)
MY
UB
1.6GDI
MENU
PASSWORD
UB 1.6GDI MT -ISG -IMMO : 39110 2BDL0/N0
1020
UB 1.6GDI MT -ISG +IMMO/SMK : 39110 2BDM0/P0
1021
UB 1.6GDI AT -ISG -IMMO : 39110 2BDL5/A7
1027
UB 1.6GDI AT -ISG +IMMO/SMK : 39110 2BDM5/B7
1028
UB 1.6GDI AT +ISG -IMMO : 39110 2BDL8/C7
1029
UB 1.6GDI AT +ISG +IMMO/SMK : 39110 2BDM8/D7
1030
UB 1.6GDI AT +ISG -IMMO : 39110 2BDE7
1031
UB 1.6GDI AT +ISG +IMMO/SMK : 39110 2BDF7
1032
Upgrade event #255 Soul (PS)
MODEL
PS 1.6GDI
MENU
PASSWORD
PS 14MY MT -ISG -IMMO : 39110 2BSH0
1020
PS 14MY MT -ISG +IMMO/SMK : 39110 2BSG0
1021
PS 14MY AT -ISG -IMMO : 39110 2BSH5
1025
PS 14MY AT -ISG +IMMO/SMK : 39110 2BSG5
1026
TSB: ENG 150 / SA 194 Rio (UB), Soul (PS) July 2015
Page 8 of 8
SUBJECT:
SERVICE ACTION: MIL ON WITH DTC(S) P0326 / P0441(SA194)
1.
Within the ECM Upgrade screen, select Manual Mode in the left column, select Engine
and then select Upgrade Event #238 or Upgrade Event #255. Select the appropriate
control unit part number by referring to the ROM ID Information Tables on Pages 3~5, and
click OK.
2.
Enter the appropriate password from the tables on Page 7, and click OK.
3.
Upgrade will begin and the progress of the upgrade will appear on the bar graph.
4.
When the GDS reports that the ECM upgrade has been successfully completed, click OK,
turn OFF the ignition key, and wait at least 10 seconds before attempting to start the
engine.
5.
Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as
EPS, ESC, and TPMS that may have been set during reprogramming.
6.
Start the engine to confirm proper operation of the vehicle.
AFFECTED VEHICLE PRODUCTION RANGE:
Model
MY
DTC
2014
P0326
P0441
Rio (UB)
Production Date Range
From October 01, 2013 through January 22, 2014
Soul (PS)
From August 26, 2013 through January 24, 2014
SERVICE ACTION CLAIM INFORMATION:
Claim
Type
Causal P/N
Qty.
N
Code
C
Code
Repair
Description
C99
(SA 194)
ECM
Upgrade
39110 2BSH7 (PS)
V
0
N99
39110 2BDE7 (UB)
Labor Op
Code
Time
Related
Parts
Qty.
0.3
M/H
N/A
0
150051R0
150051R1
 NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers
should reference SA194 when accessing the WebDCS system.
TSB: ENG 150 / SA194 Rio (UB), Soul (PS) July 2015