SSM 46281

Service Bulletin Details

Public Details for: SSM 46281

Some 2015-2017 edge/mkx, escape/mkc, fusion/mkz and explorer vehicles equipped with a 2.0l or 2.3l may exhibit damage to the engine appearance cover, valve cover and/or intake manifold when attempting to remove the appearance cover. To redu


- 2017 - 2016 - 2015 -

SSM
46281
Some 2015-2017 Edge/MKX, Escape/MKC, Fusion/MKZ and Explorer vehicles equipped with a 2.0L
or 2.3L may exhibit damage to the engine appearance cover, valve cover and/or intake manifold
when attempting to remove the appearance cover. To reduce the possibility of damage, carefully pull
straight upward on the underside of the cover at each fastener location to remove. Do not pull the
cover forward or to the side. Before installing the engine appearance cover, apply Motorcraft silicone
brake caliper grease and dielectric compound (XG-3-A) to the cover fastener grommets. Workshop
Manual (WSM) information is in the process of being updated.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.