SSM73028
Service Bulletin Details
Public Details for: SSM73028
Issue: the customer may report a noise from the engine bay. This maybe accompanied with the coolant gauge reading high and/or the charge warning indicator illuminated. Investigation finds a concern with the primary idler pulley assembly wh
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2016
| 2016 JAGUAR F-TYPE |
| 2016 JAGUAR XF |
| 2016 JAGUAR XJ |
Models from 2015
| 2015 JAGUAR F-TYPE |
| 2015 JAGUAR XJ |
Models from 2014
| 2014 JAGUAR F-TYPE |
| 2014 JAGUAR XJ |
Models from 2013
| 2013 JAGUAR XJ |
Models from 2012
| 2012 JAGUAR XJ |
Models from 2011
| 2011 JAGUAR XJ |
Models from 2010
| 2010 JAGUAR XJ |
TOPIx - SSM73028 - Primary Drive Idler Pulley Concern AJ126/AJ133 Gasoline Engines Reference SSM73028 Models F-PACE / X761 Page 1 of 2 F-TYPE / X152 XE / X760 XF / X260 XJ / X351 Title Primary Drive Idler Pulley Concern AJ126/AJ133 Gasoline Engines Category Engine Last modified 26-Oct-2016 00:00:00 Symptom 499000 Basic Engine Attachments SSM Idler Pulley.pdf (SSM Idler Pulley.pdf) Content Issue: The Customer may report a noise from the engine bay. This maybe accompanied with the coolant gauge reading high and/or the charge warning indicator illuminated. Investigation finds a concern with the primary idler pulley assembly which in some cases can lead to damage of the primary drive belt. The primary belt drives the coolant pump and generator hence the potential for the coolant gauge to read high and/or the charge warning indicator illuminating if the belt is damaged and not functioning correctly. This concerns affects LTIS (low time in service) vehicles with the 3.0 AJ126 and 5.0 AJ133 gasoline engines fitted. Cause: Under investigation. Action: In order to support the ongoing investigation work stream it is imperative that the idler pulley is removed from the engine as a complete assembly with the bracket. Do not under any circumstance remove any part of the pulley from the bracket. Refer to the illustration shown in the attached file. When the old assembly is removed please raise a Quality Report EPQR supplemented with photographs/video files where possible. Please also include address and contact details so that a PRR can be set up for return of the old idler pulley assembly and drive belt. Idler pulley/bracket complete assembly part number - C2D51367 http://topix.jaguar.jlrext.com/topix/service/archive/703721/index 11/1/2016 TOPIx - SSM73028 - Primary Drive Idler Pulley Concern AJ126/AJ133 Gasoline Engines Page 2 of 2 Technicians - Please rate this SSM and provide comments so that future communications can be improved. 1 = Poor – Basic information provided – The SSM does not help me resolve the customer concern. 3 = Average – Adequate information provided – The SSM partially helps me resolve the customer concern. 5 = Excellent – All required information provided to resolve the customer concern. http://topix.jaguar.jlrext.com/topix/service/archive/703721/index 11/1/2016 REMOVE COMPLETE BRACKET AND PULLEY AS AN ASSEMBLY, DO NOT DISMANTLE. RETAIN OLD ASSEMBLY FOR RETURN TO THE UK DO NOT DISMANTLE THE OLD OR NEW ASSEMBLY REMOVE/FIT AS AN ASSEMBLY.