SSM72828

TOPIx - SSM72828 - Transmission Rotary shift module stuck down at vehicle start up
Reference
SSM72828
Models
F-PACE / X761
Page 1 of 2
XE / X760
XF / X260
Title
Transmission Rotary shift module stuck down at vehicle start up
Category
Electrical
Last modified
20-Jun-2016 00:00:00
Symptom
203000 Basic Electrical
Content
Issue:
Rotary Gear Shift Module selector operation is unavailable following a low voltage event
-accompanied by DTC P085D-97. As a consequence the Rotary Knob will not rise and
so normal operation is prevented.
Cause:
Rotary Gear Shift Module self-learning routine is interrupted during a low voltage event
(typically occurs if battery charge is low).
Action:
When the vehicles voltage profile has returned to its normal working range (16 – 7.5
volts) an Ignition reset*** will reset the Gear shift Module and normal operation should
be possible.
*** Press stop / start button (turn vehicle off), wait for GSM character illumination to go
off, Press stop / start button (turn vehicle on).
Note: In order to fully resolve the issue & prevent re-occurrence it is recommended that
the following actions are carried out :1. Connect the Jaguar approved battery conditioner/power supply to the vehicle
2. Connect SDD and Start Session
3. Confirm presence of GSM DTC P085D-97
4. Download DVD 146.02
5. Carry out ‘Configure Existing Module’ on GSM.
For further support in diagnosing this issue please contact Dealer Technical Support
(DTS)
http://topix.jaguar.jlrext.com/topix/service/archive/663275/index
6/30/2016
TOPIx - SSM72828 - Transmission Rotary shift module stuck down at vehicle start up
Page 2 of 2
This SSM only affects 17MY year vehicles:
XE - JA942528
F Pace - DC045000
XF- Y23602
http://topix.jaguar.jlrext.com/topix/service/archive/663275/index
6/30/2016