TSB-17-32-001

Page 1 of 3
MITSUBISHI
MOTORS
Technical Service Bulletin
SUBJECT:
TORQUE UPDATES: STEERING GEAR &
LINKAGE - SERVICE MANUAL REVISION
CIRCULATE TO:
l[JGENERALMANAGER
[ X] SERVICE ADVISOR
I[X l SERVICE MANAGER
No:
TSB-17-32-001
DATE:
January, 2017
MODEL: 2014-16 Outlander,
2011-16 Outlander Sport/RVR
I[X l PARTS MANAGER
I[ l WARRANTY PROCESSOR
I[X l TECHNICIAN
I[ l SALES MANAGER
PURPOSE
This TSB updates the Power Plant Mount section of the affected Service Manuals to correct the
clamping torque of steering gear and linkage in front crossmember removal and installation.
AFFECTED VEHICLES
•
2014 - 2016 Outlander
•
2011 - 2016 Outlander Sport/RVR
AFFECTED SERVICE MANUALS
•
2014 - 2016 Outlander Service Manual, Group 32 - Power Plant Mount-> Crossmember ->
Removal and Installation
•
2011 - 2016 Outlander Sport/RVR Service Manual, Group 32 - Power Plant Mount - >
Crossmember - > Removal and Installation
------------------1,------------------
Copyright 2017, Mitsubishi Motors North America, Inc.
Continued
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link,
MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
(4419)
Page 2 of 3
TSB-17-32-001
Please make the indicated changes to the 2014 - 2016 Outlander Service Manual, Group 32 - Power
Plant Mount-> Crossmember -> Removal and Installation.
POWER PLANT MOUNT
CROSSMEMBER
1
110 ± 11 N·m*
81 :t 8 ft-lb
ACD002 12AC
•
•
•
Removal steps
Steering column bolt (Steering column shaft assembly and steering
gear & linkage connection) (Refer
to GROUP 37 - Steering Shaft
P.37-69).
Self-locking nut (Tie-rod end and
knuckle connection) (Refer to
GROUP 26 - Front Axle Hub Assembly P.26-9).
Stabilizer link and stabilizer bar
connection nut (Refer to GROUP
33 - Stabilizer Bar P.33-2 1).
•
1.
<>
>>A<<
2.
3.
4.
5.
6.
Removal steps (Continued)
Front end side panel mounting bolt
(Refer to GROUP 42A - Loose
Panel P.42A-247).
Front suspension crossmember
assembly
Joint cover grommet
Heat protector <3.0 L Engine>
Stabilizer ba r (Refer to GROUP 33
- Stabilizer Bar P.33-21).
Steering gear and linkage assembly
Front suspension crossmember
Page 3 of 3
TSB-17-32-001
Please make the indicated changes to the 2011 - 2016 Outlander Sport/RVR Service Manual, Group
32 - Power Plant Mount-> Crossmember -> Removal and Installation.
POWER PLANT MOUNT

_____________________
C_R_O_S_S_M...,;;;;;;E_M_B_E_R______ so ± 10 N·m - - - - - - - - 59 ± 7 ft-lb
36 ± 6 N·m
27 ± 4 ft-lb
5.0 ± 2.0 N·m
44 ± 17 in-lb
~£7
' r -2
~
9
25 ± 5 N·m
1s ± 3 ft-lb
y
3
m
I
110 ±1 1N·m*
81 ± 8 ft-lb*
ACA0J227AB
Removal steps (Continued)
Removal steps
>>D<<
>> D<<
<>
1.
2.
3
4.
<>
•
Steering column bolt
Steering column shaft
assembly and steering gear
and linkage assembly
connection
Self-locking nut (Tie-rod end
and knuckle connection)
Rear roll stopper center bolt
Front axle crossmember
assembly
Required Special Tool:
• MB991897 or MB992011 : Ball Joint Remover
>>C<<
>> B< <
>>A<<
5.
6.
7.
8.
9.
10.
11 .
Rear roll stopper
Stabi lizer bar bracket
Stabilizer bushing
Stabilizer bar
Joint cover grommet
Heat protector
Steering gear and linkage
assembly
12. Front axle crossmember