ITB17-001

Classification:
Reference:
Date:
TF16-002
ITB17-001
January 20, 2017
2014 – 2017 QX60; FLUID LEAK CAUSED BY
TRANSFER ASSEMBLY RIGHT SIDE DRIVE SHAFT SEAL
APPLIED VEHICLES: 2014-2017 QX60 AWD (L50)
2014-2017 QX60 Hybrid AWD (L50)
RH drive
shaft
IF YOU CONFIRM
Fluid is leaking from the right side of the transfer
assembly (see Figure 1).
Transfer
assembly
NOTE: The fluid leak is not caused by the
seal shown in Figure 1.
Fluid leak not
caused by
this seal
Fluid leaks
from here
Figure 1
ACTION
1. DO NOT REPLACE the transfer assembly.
2. Reseal the transfer assembly.

Refer to the Electronic Service Manual (ESM), section DLN – Driveline, for transfer assembly removal,
reseal, and installation information.

Refer to page 2 and 3 for additional information.
CAUTION: Be careful not to damage the transfer assembly right side drive shaft seal when reinstalling the
drive shaft.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/5
TY21C transfer assembly – exploded view
Do not disassemble this
section for the repairs in
this bulletin
Transfer
cover
Drive shaft oil seal: Fits in
end of ring gear shaft
Ring gear
shaft
Toward front of
vehicle
Figure 2
2/5
ITB17-001
Transfer
cover
Ring gear
shaft
Fluid leak caused by this seal
(33114-xxxxx); drive shaft oil seal
Figure 3
3/5
ITB17-001
PARTS INFORMATION
QX60 and QX60 Hybrid
SYSTEM GROUP
Transfer assembly
Exhaust
Drive shaft
Strut
Transfer Oil
*
DESCRIPTION
P/N *
QUANTITY
SEAL-OIL, DRIVE PINION
(Drive shaft oil seal)
33114-xxxxx
1
33142-xxxxx
1
33142-xxxxx
1
38343-xxxxx
1
33111-xxxxx
2
33118-xxxxx
1
11026-xxxxx
2
38440-xxxxx
1
38440-xxxxx
1
20695-xxxxx
2
GASKET-EXHAUST
20691-xxxxx
1
NUT
01225-xxxxx
2
NUT
01223-xxxxx
3
BOLT
01125-xxxxx
3
PIN-COTTER
NUT-LOCK, FRONT WHEEL
BEARING
NUT
Genuine Nissan Super Hypoid
GL-5 80W-90
40073-xxxxx
1
40262-xxxxx
1
54588-xxxxx
2
999MP-1XGPP0P (1)
5/8 pint
SEAL-OIL
(Oil Seal)
SEAL-OIL
(Oil Seal)
SEAL-O RING
(O-ring)
SEAL-OIL
(Oil Seal)
SEAL-O RING
(O-ring)
GASKET – FILLER PLUG (Gasket)
BEARING
(Ring Gear Bearing, Transfer cover
side)
BEARING
(Ring Gear Bearing, Transfer cover
side)
BEARING SEAL, EXHAUST JOINT
Refer to FAST (or equivalent) and use the VIN to determine the correct complete Part Numbers for
the vehicle you are working ON.
(1) Order this item through the Infiniti Maintenance Advantage program: Phone: 877-INF-IMA1 (877-4634621). Website order via link on dealer portal www.NNAnet.com and click on the “Maintenance Advantage”
link.
4/5
ITB17-001
CLAIMS INFORMATION
Submit a Primary Part (PP) line claim using the following claims coding:
DESCRIPTION
R & I Transfer Assembly
Replace Front & Rear Oil Seals
PFP
(1)
OP CODE
KA01AA
KA041A
SYM
DIA
ZR
32
FRT
(2)
(2)
(1) Refer to the electronic parts catalog (FAST) and use the Pinion Drive Seal part number (33114-*****) as the
Primary Failed Part.
(2) Reference the current Infiniti Warranty Flat Rate Manual and use the indicated FRT.
5/5
ITB17-001